Do You Have Following Problems? You will be able to Accurately detect the location of the leak, when you encounter the following situation.
|
Foxwell ST101 Introduction: FOXWELL ST101 is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time. |
Why You Need a Smoke Leak Detector？ 1. Your diagnostic tool partner The use of smoke leak detector, you can quickly and accurately determine whether the fault is caused by pipeline leakage, but also quickly find the leak point. 2. Engine fault code, 60% related to pipeline, it will help you avoid problem. If the relevant value detected by the sensor on the car exceeds the standard range, the ECU will store the corresponding fault code and automatically trigger the engine fault light. Maintenance personnel need to check for various pressure problems. Most pressure problems are caused by a leak somewhere. Using the smoke detector, it is easier to quickly find the problem and clear the fault code. 3. Convenience for Using Smoke leak detector, because of the characteristics of smoke, can carry out leak detection on the whole set of pipelines, visual operation, omni-directional, no dead angle, and no leakage point. 4. Operation safety The smoke leak detector does not need to ignite the engine when it is used, but finds the leak point by simulating the real-time working condition of the engine when the engine is static. It is very safe for people or cars, effectively avoiding production accidents. 5. Improve productivity Smoke leak detector can effectively improve the speed of vehicle maintenance, thereby improving the utilization rate of the station, as well as personnel efficiency, improve productivity. 6.Comprehensive Inspection: Smoke leak detector, due to the characteristics of smoke, can perform leak detection on the entire pipeline, with visual operation, all-round, no dead corners, and no missing leakage points. 7.Short smoke output time: Output a large amount of smoke within 10 seconds, greatly reducing diagnostic time and improving work efficiency. 8.Simple and practical: With easy-to-use features and hook design, the conical adapter and airbag adapter can adapt to most air intakes. |
Support Multi-system Test EVAP System Test
|
EVAP & E-G-R Test 1.EVAP system: find the EVAP service port (usually there is a green cover on the service port), use the special tools for EVAP valve to remove the valve core inside the service port (please note that the valve core is reverse thread), install the EVAP service port test adapter, and connect the smoke tube. |
Wide Range of Applications: The Foxwell ST101 automotive smoke leak detector is suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats.Supports all 12V vehicle batteries.
|
How To Use It? 1. Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes; (about Smoke Oil: advise use the Baby oil) Notice: No Built in air pump, need to purchase additional air compressor or air pump
|
Caution: 1. When you use this Foxwell ST101 Car Smoke Leak Detector for the first time, fill with 10-20ml baby oil. Please be careful NOT to beyond this range. 2. Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time. 3 . Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 4. During the process of leak detection, please keep away from smoke-sensitive parts. 5. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 6. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 7. The round part of this detector has temperature, please be careful to avoid burns. 8. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. |
Overheat and Antifreeze Protection: The smoke detector is equipped with the latest intelligent protection devices. When the temperature of the equipment exceeds 75 degrees Celsius, the power protection device will intelligently start and shut down to ensure the safety of the operator and equipment. If the device operates continuously for more than 15 minutes, it will be protected from overheating for a protection time greater than 10 minutes. This device is also suitable for low-temperature operation. Only car batteries with a full capacity of 12V are supported. |
Packing List: 1pc Foxwell ST101 Main Unit
|
We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect.
Please contact us if you need to use another method to pay.
Payment should be made within 7 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers’ local taxes.
Please include your special requests in eBay note if there is any.
Delivery time varies from 2 to 5 business days.
Please make sure it is correct and include phone number for delivery.
Please include your special requests in eBay note if there is any.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in US to ensure fast shipment and after-sale service.
We have more than 100 employees devoting to customer satisfaction.
1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.
2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
3:Please leave us Positive Feedback
and 5-stars★★★★★after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.
