TANIGUCHI
Jimny 3-inch / 75mm Lift
Standard Suspension Kit
JB23 33 JDM 1998-2018 RHD
We are shipping to almost all countries worldwide now. Delivery is still a bit slow, but it has almost returned to normal.We will usually ship your item within 2-4 business days after payment. However, some of our products are on back order and may take a few weeks.
Description
A Kit consisting of only basic parts. We also recommend the Premium Plus Kit with additional correction parts.
This 3" / 75mm lift suspension kit, specifically designed for the Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000) shows the best performance. Excellent stability and comfort are realized from off-road to city driving. Computer simulations, off-road, high-speed, and city driving tests were conducted numerous times. This is a very popular lift suspension kit for Jimny in Japan. Made in Japan.
This Suspension Kit lifts your Jimny by 3 inches / 75mm. Both these TANIGUCHI 3-inch Lift Suspension Kit and 2-inch Lift Suspension Kit are high-performance and high-quality, all-round coil springs. Compared to these 3-inch Lift Coil Springs, the 2-inch Lift Coil Springs offer slightly better ride comfort, but both have almost the same characteristics. Please choose according to your favorite lift amount. Also, a 70mm Suspension Kit which uses dual-rate coil springs is available. Dual-rate coil springs offer excellent comfort and controllability at high-speed driving even on rough off-road.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.
* Please note that these products are designed for a Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000). It is possible to install them for some JB43 as well, but not recommended. Also, if this Front Panhard Rod is installed on LHD (left-hand drive), it may touch the differential.
* In a normal situation, the recommended damping settings are 4. Lower settings such as 2-3 are recommended for off-road driving, or if you like soft and comfortable driving. Higher settings such as 5-6 are recommended if a heavy roof rack is installed, or you wish to suppress roll and seek solid, sporty, and stable driving. However, some people prefer a firmer ride off-road, so it's up to you. We don't recommend 1 or 8, so please set them between 2 and 7.
* Fixed Shock Absorbers and Adjustable Shock Absorbers are available. Please let us know if you would like Fixed ones. We will refund you 135 USD.
A) 75mm Lift Standard Suspension Kit includes Coil Springs, Shock Absorbers, 50mm Extended Brake Hoses, Caster Correction Bushes 5.0, and Front and Rear Panhard Rods.
B) 75mm Lift Premium Suspension Kit includes Standard Kit plus Caster Correction Bushes 2.5, Offset Stabilizer Relocation Brackets, Front Suspension and Steering Correction Kit, Rear Panhard Rod Relocation Bracket, and Rear Panhard Rod Offset Relocation Bracket.
[ Required in some cases ]
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
Adjustable Shock Absorbers
(mm) | front | rear |
extended length | 475 | 525 |
compressed length | 295 | 327 |
Fixed Shock Absorbers
(mm) | front | rear |
extended length | 480 | 525 |
compressed length | 296 | 324 |
Coil Springs
|
|
free length (mm) |
spring rate (N/mm) |
lift height (mm) |
|
FR |
412.5 |
18.9 |
+75 |
|
FL |
407.5 |
18.9 |
|
|
RR |
413.0 |
17.3 |
+75 |
|
RL |
379.0 |
17.3 |
Applicable vehicles: Jimny (1998-2018) JB23 JDM JB33 RHD
Brand: TANIGUCHI
Mounting: Professional (professional installation required)
About TANIGUCHI
"Off-Road Service TANIGUCHI" is Japan's number one Jimny custom parts supplier which has manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.Shipping
Japan has strict export regulations and air transport safety standards, making it difficult to export gas damper from Japan. However, our store is an authorized dealer that has a good relationship with the manufacturer. We have a manufacturer's safety certificate, and we have FedEx and DHL accounts, so we can export gas damper worldwide from Japan. Please note that certain countries may have import restrictions.
We ship worldwide with FedEx or DHL that insures and tracks all products. We will ship your item within 2-4 business days after payment. We can ship ONLY to your billing address for security reasons. We are closed Wednesdays, Saturdays and Japanese national holidays. We are also closed for a few days in August and New Year’s Day.
Return
We can accept a return within 30 days after you receive it. You must contact us before you make a return. The item must be returned in its original condition from the time you received it. There will be no returns on products that show any evidence of use.If the buyer chooses not to keep the product for any reason and wishes to return the product, or the item is returned due to customs regulations, or the item is undeliverable or refused upon delivery, then it is the buyer’s responsibility to cover all return shipping costs.
About Us
Direct from Japan, Compass Auto Japan is selling top quality Jimny parts worldwide. Our company is a small online shop and doesn't have a showroom. But our products are carefully selected and well-tested and mainly TANIGUCHI, Japan's number one Jimny parts supplier. Our staff is Japanese and Canadian outdoor enthusiasts. All our products are authentic and of exceptional quality.Jimny has 2 categories in Japan; Kei-car and Sierra. Kei-car (JB64, 23, JA22, 12, 11, 71, SJ30) has a 660cc engine. And Sierra (JB74, 43, 33, 32, 31, JA51, SJ40) has a 1.3 or 1.5L engine, the same as the international models. Our products are designed for Sierra and some products work for the Kei-car as well. They are designed for RHD (Right Hand Drive) and JDM (Japan Domestic Market). We hope that most will fit international models and LHD (Left Hand Drive) but we have not tested their compatibility yet. Please ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
All products are designed by Japanese companies and most of them are made in Japan.
Please Note
Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as gifts.