Metric Nitrile Rubber Nbr O Ring Seals 1.5mm Cross Section 4mm-103mm OD Oil Seal
Material: Nitrile Rubber NBR
Cross section: 1.5mm
Outer diameter: 4mm~103mm
Inner diameter = Outer diameter-Cross section -Cross section
temperature range for Nitrile is: -30°C to +120°C
However should not be subjected to any extremes for long periods of time
Product Introduction
The O Ring rubber sealing ring is currently the main seal in rubber sealing products. It has the advantages of simple structure, low price, convenient installation, small dynamic friction coefficient, and reliable sealing. It is widely used in automobiles, tractors, various hydraulic presses, engineering machinery, mining, metallurgy, machine tools, and various hydraulic components. It acts as a sealing device in stationary or reciprocating motion as well as in rotating motion.
Working medium: air, water, mineral oil, etc.
Performance: NBR rubber with heat resistance of 120 degrees, good oil resistance, wear resistance, etc
Working medium: air, water, mineral oil, etc.
Performance: NBR rubber with heat resistance of 120 degrees, good oil resistance, wear resistance, etc
Advantages:
·Good oil, water, solvent, and high-pressure oil resistance characteristics
·Good compression resistance, wear resistance, and tensile properties
·Rubber parts used for making fuel tanks and lubricating oil tanks
·Used for petroleum based hydraulic oils, gasoline, water, silicone grease, silicone oil, diester based lubricants, and ethylene glycol based lubricants
Rubber parts used in fluid media such as hydraulic oil
Disadvantages:
·Not suitable for use in polar solvents such as ketones, ozone, nitrohydrocarbons, MEK, and chloroform
·Not resistant to ozone, weather, and heat air aging
Applicable medium:
·Fatty hydrocarbons (butane, propane), engine oil, fuel, vegetable oil, mineral oil
·HFA, HFB, HFC hydraulic oil
·Low concentration acids, alkalis, salts, and water at room temperature
·Good oil, water, solvent, and high-pressure oil resistance characteristics
·Good compression resistance, wear resistance, and tensile properties
·Rubber parts used for making fuel tanks and lubricating oil tanks
·Used for petroleum based hydraulic oils, gasoline, water, silicone grease, silicone oil, diester based lubricants, and ethylene glycol based lubricants
Rubber parts used in fluid media such as hydraulic oil
Disadvantages:
·Not suitable for use in polar solvents such as ketones, ozone, nitrohydrocarbons, MEK, and chloroform
·Not resistant to ozone, weather, and heat air aging
Applicable medium:
·Fatty hydrocarbons (butane, propane), engine oil, fuel, vegetable oil, mineral oil
·HFA, HFB, HFC hydraulic oil
·Low concentration acids, alkalis, salts, and water at room temperature
WE ALSO OFFER TRADE DISCOUNTS IF YOU ORDER BIG.
PLEASE CONTACT WITH US
Package Including:
- According to your choice.
Guarantee:
- Good quality. Buy with confidence!
- We maintain high standards of excellence and strive for 100% customer satisfaction!
Shipping
- We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Contact us / Feedback：
- Please contact us via ebay messages only. A response will not be returned via email. All ebay messages will be answered as fast and efficient as possible.
- Please take a look at more great items offered in my store, and we do hope you enjoy your shopping experience.
