Chameleon Window Tint Film Windscreen Tinting Film 80%VLT
Item Description

Chameleon Window Tint Film

Chameleon window tint film. The film colour will change from blue to purple depending on different angles of view. Professional automotive window tinting film delivers a dual package of cool looks and tremendous value. Our chameleon window tint films are also easily heat shrinkable, therefore the film is less likely to be compromised during the installation process. Non-fading window tint with outstanding film clarity & visibility

Standard Chameleon 80% Visible Light Transmission - This is NOT legal for the front windscreen but fine for all other windows.

The United Kingdom sets minimum light level requirements for vehicle window tint. Please make sure you follow these requirements: https://www.gov.uk/tinted-vehicle-window-rules.

About Window Film

There are many different grades, shades, colours, and thicknesses of available window films built to offer solutions to a variety of challenges. Window films are a retrofit upgrade for existing glass that can be used to address problems inherent to glazing, including:

Heat and glare reduction
Thermal insulation
UV filtration
Safety and security
Privacy
Decoration, Signage and branding
Protection from graffiti
Window films are an extremely cost-effective method to reduce heating and cooling costs in existing buildings by reducing the amount of heat transfer through glazing.

Installation

With all films bought you will receive full fitting instructions on paper. 

IMPORTANT :- 

Applications are NOT RECOMMENDED in the following situations:- 

When outside temperatures are below freezing or in very bright direct sunlight. To rough cast glass surfaces. 

TOOLS REQUIRED - Washing up liquid, Spray bottle, Squeegee, Craft knife, Glass scraper, Straight edge, Tape measure, Soft lint free cloth. Please see our tools category for various tools and fitting kits. 

WINDOW FILM is a very thin sheet of material that requires handling with great care. Creasing & folding must be avoided. As with aluminium foil, once creased, the film will remain creased and therefore cannot be returned. Applications need to be carried out in a draught & dust free situation. 

PREPARATION & PRE-CLEANING are vitally important & care must be taken to flush any dirt particles out of the window frame. Some airborne dust may get under the film, but this is difficult to avoid completely & it's presence will not affect the performance of the installation. 

DURING DRYING OUT some haziness will be evident & this will disappear & dry out over a 2-4 week period. 

CLEANING as you would for normal windows but not until 2 weeks after installation & always with a soft leather or cloth and clean water, never use any abrasive cleaners or cleaners that contain amonia. 


1. WINDOW PREPARATION :- 

1. Make up the slip solution in spray bottle (1 tsp washing up liquid to 1 pint cold water). 
2. Thoroughly wash glass with slip solution & squeegee dry. 
3. Remove paint, varnish or other foreign matter with a scraper. 
4. Spray glass with slip solution & squeegee out, checking that the glass surface is very clean & dust free. 


2. FILM HANDLING :- 

Adhesive surface is protected between 'window film' and liner. 
Window film may be cut to approximate size with a very sharp blade or scissors. It is recommended that the film be cut at least 1/2" longer & wider than the glass. You are now ready to apply the film to the glass. 

Note: Separate a corner of the 'window film' and liner with 2 small pieces of adhesive tape on either side of the product. 


3. FILM APPLICATION :- 

1. Thoroughly wet the glass with the slip solution, this will hold the film in place whilst you remove the clear liner. 
2. Place film on wet glass with liner facing you. From the ready separated corner carefully peel off the liner. Spray the adhesive surface generously with the slip solution (you cannot apply too much solution). 
3. Carefully reverse film on to the glass so that the adhesive side is now in contact with the glass. Note: Keep film taut and straight, do not allow film to curl up on itself or to wrinkle. A crease or wrinkle will not flatten out on application. 
4. Position the film by gently sliding on wet surface and smoothing out large air bubbles. 
5. Ensure all glass area is covered by the film with slight overlap on all sides. 


4. SQUEEGEE TECHNIQUE :- 

1. Spray the film with the slip solution to give slip for the squeegee. 
2. The first stroke should be horizontal across the top of the window. 
3. The next stroke should be downwards from one edge with succeeding strokes working down and away from the first strokes. 
4. On final squeegee of the top & bottom edges the squeegee may be pushed towards the edges to remove any excess water. 
5. If a particle is trapped behind the film, carefully lift the film from the nearest corner & remove the particle. Before replacing the film, spray sufficient slip solution to thoroughly wet the glass & film. Replace the film & re-squeegee. 


5. FILM TRIMMING :- 

1. Using a straight edge (should have about 1/8" thickness), place it on end at the edge of the window. 
2. Trim the film using a razor blade of craft knife so that there is a margin width of the straight edge of about 1/8". 
3. Repeat for each edge of the window. 
4. After trimming remove excess film. 
5. Repeat entire squeegee procedure. A firm pressure is necessary to effect a strong bond. 
6. You can then firmly push down all edges with a hard card or credit card wrapped in tissue. 

Important note to customer: Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective prior to fitting. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Laws must be adhered to when applying to vehicles.

Shipping

All free delivery is for UK mainland only. If you require shipping outside the UK please contact us via eBay message for a quote. 
 
Free courier is for UK mainland only and does not cover Northern Ireland, Southern Ireland, any other offshore islands and the Scottish highlands. 
If you are unsure of the cost of postage for you please do not hesitate to ask. 

Whenever possible all orders placed before 1pm will be sent the same working day, this may not always be possible on extremely busy days. Orders placed after 1pm will be sent the next working day whenever possible. From there delivery time will depend on what service you chose at checkout.

Contact Us

Quickest method of contact is by eBay message.

Returns

All of our products come with a 14 day guarantee. Just send the item back to us in its original condition and packaging with all paperwork within 14 days of delivery and we will gladly refund your money less our postage costs to you. We do not require a return authorisation. We recommend you use an insured carrier to return the item. We will not be responsible for any return postage costs. 

If your order is damaged in any way once you receive it i.e. creases in the film, please email or phone us straight away and do not attempt to fit the film, we will refund or replace the damaged unused goods as soon as possible. (We are unable to replace damaged goods if you have used or tried to fit them).
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.