1 x 12V ac 2 Output Through Hole PCB Transformer, 14VA
PCB Mounting Low Profile 115 / 230Vac Primary
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connectionTwin secondary windings for series or parallel connectionLow profile compact designVacuum epoxy resin moulded to UL94-V0 ratingDouble section glass fibre reinforced polyamide bobbins100% electrical and flash testedLow inter-winding capacitanceLow radiated noiseExtra fixing holes for secure board mountingStandard: EN60742, VDE 0551, IEC 61558
| Selection Guide | |||||||
| VA Rating | Fixing Centres | Pin Configuration | |||||
| C1 | C2 | P1 | P2 | S1 | S2 | A | |
| 4 VA | 37.5 | 47.5 | 15 | 10 | 25 | 5 | 35 |
| 6 VA | 37.5 | 47.5 | 15 | 10 | 25 | 5 | 35 |
| 10 VA | 50 | 62.5 | 16 | 15 | 26 | 10 | 45 |
| 14 VA | 50 | 62.5 | 16 | 15 | 26 | 10 | 45 |
| 18 VA | 50 | 62.5 | 16 | 15 | 26 | 10 | 45 |
| 24 VA | 50 | 62.5 | 16 | 15 | 26 | 10 | 45 |
| 30 VA | 50 | 62.5 | 16 | 15 | 26 | 10 | 45 |
| 42 VA | 60 | 75 | 27 | 15 | 37 | 10 | 53.5 |
| 52 VA | 60 | 75 | 27 | 15 | 37 | 10 | 53.5 |
| Isolation | Primary to secondary 5kV |
| Primary to primary 1kV | |
| Secondary to secondary 250V | |
| Protection | Class 2 |
| Insulation | Class E (120°C) Class A (105°C) |
| Max. Ambient Temperature | +40°C |
| Pin Diameter (mm) | 0.8 mm |
| Fixing: mechanical fixings can be supplemented by 4 self tapping screws (no. 4 x 9.5mm max. on the 2VA to 30VA transformers and M3 on the 42 and 52VA transformers) using holes mounted in the corners of the caseNote: For conformance reasons, transformer with 2 x 24V outputs should not have their secondaries connected in series |
Note
Transformer with 2 x 24V outputs are not VDE, SEV approved.
Standards
VD 61 558
- FREE UK DELIVERY ON ALL ITEMS
- HIGH QUALITY ITEMS
- FRIENDLY, HELPFUL CUSTOMER SERVICES
