Wishbone Lever Bar Ball Joint Suspension Arm Extractor Bottom Control Pry Tool

Product View

Detail

Wishbone Suspension Arm Lever
  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts during the servicing of the drive shaft or during the replacement of the wheel bearing.
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
  • Use leverage to pull down on and free lower control arms and double wishbone suspension
  • Aids in getting ball-joints free from knuckles
  • Keeps control arms out of the way to service axles, knuckles, front and rear struts and more
  • Provides the muscle needed to fight against bushing pre-load and anti-sway bar tension
  • Comfortable rubber grip.
  • This product comes with 5 levels of adjustment, so you can adjust the snap position to suit different models of car.
  • Adjustable canter lever hook.
  • Sliding adjustment for easy positioning.
Specification：
  • Material: Iron
  • Colour: Blue
  • Material: Iron + Rubber
  • Total length: 1180mm
  • Type: 1.2m wishbone tool
This prevents problems such as:
  • the joint wedges again in the cone, after it was pressed down briefly with a tyre lever.
  • the ball joint or gaiter get damaged.
  • the mechanic injures himself or damages suspension parts when the tyre lever slips away.
Notes:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please allow the slight color difference caused by the shooting light.
Package Include:
  • 1 x Wishbone Tool

Product View

Detail

Wishbone Suspension Arm Lever
  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts during the servicing of the drive shaft or during the replacement of the wheel bearing.
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
  • Use leverage to pull down on and free lower control arms and double wishbone suspension
  • Aids in getting ball-joints free from knuckles
  • Keeps control arms out of the way to service axles, knuckles, front and rear struts and more
  • Provides the muscle needed to fight against bushing pre-load and anti-sway bar tension
  • Comfortable rubber grip.
  • This product comes with 5 levels of adjustment, so you can adjust the snap position to suit different models of car.
  • Adjustable canter lever hook.
  • Sliding adjustment for easy positioning.
Specification：
  • Material: Iron
  • Colour: Blue
  • Material: Iron + Rubber
  • Total length: 1180mm
  • Type: 1.2m wishbone tool
This prevents problems such as:
  • the joint wedges again in the cone, after it was pressed down briefly with a tyre lever.
  • the ball joint or gaiter get damaged.
  • the mechanic injures himself or damages suspension parts when the tyre lever slips away.
Notes:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please allow the slight color difference caused by the shooting light.
Package Include:
  • 1 x Wishbone Tool

On 08-Feb-2024 at 09:37:38 GMT, seller added the following information:

DataCaciques