◆100% New and Never Used
Key Features:
1. Designed to enhance your visibility and driving safety at night and bad weather.
2. Latest 4-side COB LED light source, super bright without blind zone.
3. Efficient cooling system ensures maximum headlight performance and appropriate working temperature.
4. Built-in smart IC chip provides intelligent temperature control and allows for instant start.
5. IP68 waterproof and high temperature resistant, withstand extreme weather conditions.
6. Easy installation without any modification or additional wiring, plug and play.
Compatible Models and Years:
- Universal for most vehicles on the market like SUV, bus, truck, sedan, pickup, sport utility etc.
Specifications:
◆Model:H11/H8/H9
◆light Source Model: 4-side COB Chip
◆Power: 110w/Set (55w/bulb)
◆Lumen:16000LM/Set (8000LM/bulb)
◆Operating voltage:DC9-30V
◆Beam Type:High beam or Low beam or Fog beam
◆Material:Aviation 6063 aluminum profile
◆Beam Angle:360°
◆Color Temperature: 6000K-6500K Cool White
◆Lifespan:over 50000h
◆Working Temperature: -40-+80 Centigrade
◆Waterproof rate: IP 67
◆Connector Type:Plug and Play
◆Use for: High Low beam, replacement halogen, not compatible with xenon/HID
Features:
◆Super bright Bridgelux COB chip,360 degree clear beam no blind zone
◆IP Rate: IP67
◆Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
◆High quality Aluminum heat dissipation ensures the secure temperature range
◆Low Power Consumption than Halogen bulb, Energy Saving
◆Low Voltage Protection, High Precision Constant Current driver Chip
◆Shakeproof and Long lasting up to 50,000 Hours.
◆Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
◆All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
◆Easy installation
Package Include:
◆2x H11/H8/H9 LED headlight bulbs
New and old boxes are shipped randomly
LED headlight advantages:
◆LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
◆Fast cooling , using the most advanced, heat-dissipating structural design.
❖Low warranty:
The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
◆Low heating temperature, The working temperature of helium can reach 800°-1000°
◆LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
◆Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
Install Caution:
◆As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
◆Put the vehicle into park or make sure it is securely in gear.
◆Make sure to have the ignition turned off and the keys removed.
◆Be careful to avoid burns, especially when turning on or off the vehicles lighting.
◆Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
◆Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
◆Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Install Caution:
- 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation.
- 2. Put the vehicle into park or make sure it is securely in gear.
- 3. Make sure to have the ignition turned off and the keys removed.
- 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
- 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
- 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
- 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Note:
1. Please check the size of your bulbs on your vehicle before purchasing.
2. Please make sure the headlight housing has enough space for installation before purchasing.
3. Professional installation is highly recommended. If you have any questions, please feel free to contact us.
4.Compatible list can not show up all car model，it is only for reference. It may exist someting error for some car model because of the car upgradtion and car modification.So please make 100% sure before you purchase.Otherwise, we are not responsibe for this, thanks for your cooperations!
