THE IMAGE PRINTING CO.
__________
911 GT3 RS 997 FLAG SIDE STRIPE & ARCH DECALS KIT
You will receive:
- 2 x lower side flag stripes
- 1 x GT3RS Badge/Boot Decal
- 1 x GT3RS Front Wing Decal
- 1 x GT3RS Rear Wing Decal
- Fitting instructions
- A vinyl blade
- A Vinyl Squeegee
- Practice material
Please note these are not genuine stripes but have been made to measure and templated from a genuine car.
Images shown are the exact pieces you will receive. If you have a specific model you would like these to fit, please get in touch.
We need to know: Model, Year and Colour choice.
THE COLOURS
Please leave an eBay note stating the EXACT colour and finish you would like.
Our EXACT colours can be found in this listing images.
If you are after a custom colour, then please contact us first.
TOOLS
To ensure a perfect finish you need the perfect tools. With this kit you will receive
1 x Vinyl Squeegee
1 x Vinyl blade
We recommend a heat gun or hairdryer to help the vinyl conform around tight or curved areas.
APPLICATION
To apply this kit you simply peel the panels off the backing sheet, align the top and slowly apply using the supplied squeegee working your way from top to bottom. We only use Hexis & 3M branded vinyl which we have tried and tested in house. All our vinyl is fully conformable and designed for this application. No application tape is needed. To remove the vinyl from your car we recommend heating it up using a heat gun or a hair dryer and then peeling from a corner.
Need Fitting? Please contact us for a quote and booking date.
WASH AND CARE
Vinyl can be washed using a pressure washer, on a lower pressure. Avoid pointing the gun at the edges of the vinyl. Standard car shampoos work perfectly on vinyl. Keep all wheel cleaners away from vinyl edges.
POSTAGE
DPD EXPRESS - 1-3 Working Days - FREE
All of our items are sent tracked.
HAVE A QUESTION?
Please don’t hesitate to ask any questions or queries you may have!
The Image Printing Co. Saunderton