Often called rubber roller, or rear roller, this part sits at the back of the A4 Thermal-Copier machine and is attached directly to the drive motor. It is actually this part that turns the glass and operates the machine

A carrier should always be used with a Thermal-Copier as part of the machines normal usage, failure to use a carrier will cause solvents in the tattoo spirit paper to 'eat' into the rubber, making it smooth and loose grip, causing jams. If a jam occurs due to slippage and a flat spot appear, replacement of the part is required as continued usage will also damage the glass.

Genuine Rear Roller OEM spare part for all A4 Thermal-Copier (also called Thermocopier) models.
Serial: S2-xxxx
Serial: S6-xxxx
Serial: S8-xxxx
Serial: A4xx-xxxx

This part is included in the A4 Major Service Kit.

 

Installing this part yourself?

It is recommended a qualified service technician install this spare part to ensure correct operation and maintain the product warranty.
- contact us for machine service or to install of parts with full parts warranty.

Where the product is purchased by the customer, a limited product warranty applies to self install once product is opened. Please read before purchase, as opening packaging is acceptance of limited product warranty for self install.
- product remains warranted against faulty manufacture.
- product is not warranted once opened/ installed due to improper installation or usage by the customer.
- no installation/ wiring/ technical documentation/ information/ install videos are available for self install.
- damage caused to machine/ persons/ components not covered by self install.

Transport Damage must be notified prior to install/ usage.
- The product will be safely packaged and shipped.
- Upon receipt, please check your package contents carefully.
- Where damage to the item occurs in transport, is MUST be reported within 24 hours of delivery.
- Where the customer fails to notify us of transport damage within the 24hour period, it is acceptance the customer forgoes all claims for damages, incorrect description, damaged product, incorrect product description and claim for transport damage.

The above conditions have been instigated due to fraudulent claims by customers for transport damage following improper installation/ handling of the product. If you are not qualified to install the spare part, you are unable to attempt install, break the part and claim a return/ credit.
- Please return machine for service by a technician.
- The part remains warranted against faulty manufacture at all times, not improper usage by the customer.

 

Often called rubber roller, or rear roller, this part sits at the back of the A4 Thermal-Copier machine and is attached directly to the drive motor. It is actually this part that turns the glass and operates the machine A carrier should always be used with a Thermal-Copier as part of the machines normal usage, failure to use a carrier will cause solvents in the tattoo spirit paper to 'eat' into the rubber, making it smooth and loose grip, causing jams. If a jam occurs due to slippage and a flat spot appear, replacement of the part is required as continued usage will also damage the glass. Genuine Rear Roller OEM spare part for all A4 Thermal-Copier models. Serial: S2-xxxx Serial: S6-xxxx Serial: S8-xxxx Serial: A4xx-xxxx This part is included in the A4 Major Service Kit.