Please note
The package is mainly for Tesla user. This connector fits Model S and X for the Facelift models from 09/2015 or VIN bigger than P70000. we don't offer Scan my Tesla(Android) and tesLAX(iOS).Please download/purchase at Google Play and Apple app store. Please consider purchasing MX+ package if you also need to work with iPhone. Ebay item ID: 124601098137 Please contact Scan my Tesla/tesLAX if you have any questions with the use of the apps.
Package
OBDLink LX diagnostic adapter
TESLA MODEL S/X OBD2 ADAPTER(for the Facelift models from 09/2015 or VIN bigger than P70000.)
OBDWiz Diagnostic Software License Full Version (English)
OBDLink APP for Android
Free firmware updates for the interface Free software updates
Description for Tesla
This package allows you to connect between two console connectors. You can now monitor your Model S/X Vehicle CAN bus for data configuration and derive operational data from an OBDII port. Important: To install the adapter cable, the vehicle must be switched off or the HV loop and 12V must be disconnected. Switching off the vehicle via the display: In order for the vehicle to switch off completely, no sensors must be operated (doors, seats, pedals). It takes a moment and then you can clearly hear the HV contactor clicking. Only then may the CANBUS be disconnected and the adapter cable inserted. If there is no clicking audible, the HV loop (right under the rear seat bench) and 12V must be disconnected. To install the cable, the cover of the center console below the ventilation nozzles in the rear footwell must be removed (it is only clipped on).
General Description for LX
Complete OBD-2 diagnostic system. OBDLink LX OBD2 / EOBD Interface for all protocols and Bluetooth computer connection. Thanks to the Bluetooth connection, it is ideally suited for PC, laptop, PPC devices with Windows Mobile 5 - 6.5 or Android smartphones and tablets (various apps available in the Android Market). Based on a modern STN1170 OBD-2 interpreter chip. Fully compatible with all ELM327 applications and ELM327 chip. Delivery with OBDWiz (for PC / laptop) software license and OBDLink APP. The device has a unique "BatterySaver Technology" to save the vehicle battery. When not in use, the device goes into sleep mode to reduce power consumption. Quiescent current is only 2-3mA. Hacker protection - unique technology protects the device from unauthorized access by strangers. Supported protocols ISO9141-2, KWP2000 slow init, KWP2000 fast init, PWM, VPWM, CAN 11bit / 250kB, CAN 11bit / 500kB, CAN 29bit / 250kB, CAN 29bit / 500kB Supported vehicles All US cars from 1996, European gasoline cars from 2001 and diesel from 2004 regardless of make and model BMW motorcycles All BMW motorcycles from approx. 1999 until today are supported. Please note that the 10 Pol. Adapter cable (can be ordered at an additional cost) and the MotoScan app for Android from the Google Play Store are required. For the latest motorcycles (K50, K48, etc.), firmware version 4.1.x or higher must be installed on the adapter.
