NOTE:
About shipping:PO BOX address may not be available for delivery。as higher freight costs, shipping charges may apply to certain addresses， we jut put few charges on our listing , pls understand, sometime this fee may be not correct,Notes：If your address is remote, you will need to pay shipping fee difference. Thanks for understanding
About price:offer accetable, you can send us offer directy ! Bulk sale acceptable ! buy directly or email us directly !
About quantity:if you need more, email us ! sometimes, we put few in liting, there are more items in wearhouse !
DESCRIPTION
Relay Installment insturction.
RED wire :connect directly to battery.
WHITE wire :ignition switch power source.
BLACK wire :connect thermos switch.
BLUE wire: connect the Fans.
Feature
It is an automatic switch which uses a smaller current to control a larger current.
It will make installing any Electric Fan(s) to your cooling system project that much easier
used in automatic control circuit. for the professional auto mechanic,the weekend machanic and for all DIY'ers.
takes all of the guess work out of installing a single or a dual fan setup.
Fitment
Compatible with almost all automobiles and devices equipped with a 12V DC power supply.
Like starter kills, power door lock/actuator control, change a low current output to high current,
add ignition/accessory outputs,control motors/other electronics.
It is also suitable for automobile used for control, alarms, horn, headlight and more.
About the Relay PinsPins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
turn on the relay.
- Pin 85 - is usually negative (-)- Pin 86 - is usually positive (+)
Pin 30 - is either a (+) or (-) source that feeds Pin 87 or Pin 87a
Pin 87 - when the relay is 'on': Pin 30 and Pin 87 are connected
What's Note
* The relay is rated for 30A, while the socket 14AWG wires are not big enough for the rated 30/40 amps.
If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
Also, you can use 6.3 mm female connectors to connect directly to the relay pins. The relay should be good for 30 amps.
-
All orders will be sent within one business day after payment received.
Note: Please contact for quote if international postage NOT display.
(shipping and handling charge is only for the lower 48 states in USA, other states'[Alaska, Hawaii, and Puerto Rico etc.]shipping cost , please contact us for quote.)
-
A new return is considered a brand new item that you ended up not needing or perhaps you purchased incorrectly for your specific vehicle.
Please keep in mind that spending time before purchasing the part to confirm it is indeed exactly what you need can help prevent you from ordering the wrong part.
Please remember to email us which warehouse to send the item back before return. And all returns must be shipped back in their original factory packaging.
Shipping Damage
Shipping damage is any item/package suspected of being broken or damaged in anyway during the shipping process. We purchase full insurance for this, however the damage must be reported to us within 3 days of receiving the package.
-
1 Year warranty against manufacture defect.
Replace/return are available if buyers receive wrong/damaged/defective items.
For replacement or return , buyer should keep the item in acceptable packing.
Before replace or return ,buyer should submit proof to us by pics if possible.
Anyway ,by nice communications ,we can find a way to make you satisfied
-
Very appreciated for your support. I hope you are happy with your purchase.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us.We request that you contact us immediately BEFORE you give us
or 
feedback, so that we can satisfactorily address your concerns.
If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
Relay Installment insturction.
RED wire :connect directly to battery.
WHITE wire :ignition switch power source.
BLACK wire :connect thermos switch.
BLUE wire: connect the Fans.
Feature
It is an automatic switch which uses a smaller current to control a larger current.
It will make installing any Electric Fan(s) to your cooling system project that much easier
used in automatic control circuit. for the professional auto mechanic,the weekend machanic and for all DIY'ers.
takes all of the guess work out of installing a single or a dual fan setup.
Fitment
Compatible with almost all automobiles and devices equipped with a 12V DC power supply.
Like starter kills, power door lock/actuator control, change a low current output to high current,
add ignition/accessory outputs,control motors/other electronics.
It is also suitable for automobile used for control, alarms, horn, headlight and more.
About the Relay PinsPins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
turn on the relay.
- Pin 85 - is usually negative (-)- Pin 86 - is usually positive (+)
Pin 30 - is either a (+) or (-) source that feeds Pin 87 or Pin 87a
Pin 87 - when the relay is 'on': Pin 30 and Pin 87 are connected
What's Note
* The relay is rated for 30A, while the socket 14AWG wires are not big enough for the rated 30/40 amps.
If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
Also, you can use 6.3 mm female connectors to connect directly to the relay pins. The relay should be good for 30 amps.