MD 800.1 1 Ohm Taramps Amplifier

Taramps presents the amplifier module MD 800.1 in the 1 ohm version. It has been carefully developed with the highest technology, offering high performance and quality for the most varied automotive sound systems, serving the entire frequency range, in other words, it is a FULL RANGE module. It is an amplifier classified as mono, has a channel with a maximum power of 800 Watts RMS. Welcome to the sound world of Taramps.

Technical Information:
OPERATION CLASSClass D
NUMBER OF CHANNELS01
MAXIMUM POWER
@ 12.6 VDC - 1 OHM: 800 W RMS
@ 12.6 VDC - 2 OHMS: 560 W RMS
INPUT SENSITIVITY220mV (RCA) / 6V (WIRE)
SIGNAL TO NOISE RATIO> 90dB
FREQUENCY RESPONSE(Full Range) 10Hz ~ 20KHz (-3dB)
CROSSOVER HIGH PASS (HPF)10Hz ~ 90Hz (-12dB/8ª) Variable
CROSSOVER LOW PASS (LPF)90Hz ~ Full (-12dB/8ª) Variable
BASS BOOSTParametric (35 ~ 55Hz) 0 ~ 10dB
THERMAL MANAGEMENTSmart Cooler with 2 speeds
INPUT IMPEDANCE10K Ohms
PROTECTION SYSTEMOutput overload, low and high supply voltage
MIN. SUPPLY VOLTAGE9 VDC
MAXIMUM POWER SUPPLY VOLTAGE16 VDC
CONSUMPTION AT REST1.20 A
MAXIMUM MUSIC CONSUMPTION45 A
MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL90 A
DIMENSIONS (H X W X D)7.08" x 2.00" x 6.89"
WEIGHT2.69lb
EAN7898556845151
Warranty: 
Taramps products come with a 1 year limited warranty from the manufacturer. This warranty does not cover: Burnt voice coils, abuse and damaged caused by improper use or installation, physical damage to the product cause by the consumer, installation charges incurred, damage to amplifiers when connected at less ohm load than specified by the manufacturer, damage to amplifiers caused by insufficient electrical requirements, water damage, excessive wear and tear, and any other cause implied in the warranty card supplied by the manufacturer.

Shipping:
We offer free Same-day shipping to the USA. For international shipping, please ask for availability.

Return Policy:

You may return most new, unopened items within 30 days of delivery for a full refund, less any shipping costs and re-stocking fees.

  • All items returned that are not defective, in NEW condition, and unopened will be applied a 15% re-stocking fee; this fee covers shipping expenses when sent and handling

  • We shall issue the refund upon return (once the item has arrived at our warehouse). All returns will be inspected upon arrival and applied a re-stocking fee of between 15% to 50% dependent on the condition of the item returned

  • The customer must ensure that the item is adequately wrapped, secured and that it includes all components (including free items) when returning the item

  • No components should be missing, including screws, manuals, cables, protective films, plastic coverings, etc. The item returned must be in NEW condition. The factory seal cannot be open in any case


FAILURE TO MEET ANY OF THESE REQUIREMENTS WILL RESULT IN A HIGHER RE-STOCKING FEE OR DENIAL OF RETURN REQUEST