Welcome to our page


For sale we have our custom-made Peugeot Partner to Ford Fiesta 4 x 108 Hubcentric spigot adapters Spacers sold in a set of 4 

 16 x Extended Tapered M12 x 1.25 x 45mm Tapered 17mm Hex head HT wheel bolts (pictured)

ALL WHEEL BOLTS ARE TUV APPROVED BY THE TECHNICAL INSPECTION ASSOCIATION

SUITABLE FOR 

Peugeot Partner Van 1996-2008

to fit Ford Fiesta 2005 Wheels

PLEASE DO NOT BUY THESE SPACERS IF YOU ARE NOT FITTING FORD 4X108  63.4CB WHEELS TO THE PEUGEOT VEHICLE

DESIGNED, DEVELOPED AND MACHINED IN HOUSE AT OUR BARNSLEY HQ

Spacers are 20mm wide giving 40mm overall increase across the axle.

·         All our custom-made spacers and adapters are manufactured from 6082 T6 MARINE Solid billet Aluminium

One of the most cost-effective mods on the market and easy to fit in 7 steps

• Simply unbolt your wheel and remove.
• Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
• Apply a little copper grease or similar to stop the faces sticking together.
• Slide the spacer on to your existing hub.
• Check the spacer is sitting flush against the original hub with no visible gap
• Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
• Secure the wheel with the extended bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD. Visit www.watfields.com

Please contact us to discuss any enquiries you may have