GNSS-01 Multi System GPS Receiver. GPS, QZSS, GLONASS and BeiDou systems

USED IN HF/VHF Vehicle Systems for Tracking.

The GNSS-01 is a highly accurate Multi System GPS Receiver. It provides concurrent reception of GPS, QZSS, GLONASS and BeiDou satellite navigation systems. 

The GNSS-01 has a significant operational advantage over GPS only system receivers giving the following user benefits;

·       Higher position accuracy

·       Faster cold start position acquisition times

·       More robust against interference

·       Improved acquisition success in harsh signal environments

·       Higher immunity to jamming and spoofing

·       Intelligent EW detection and removal

·       RF filtering for adjacent radio transmitters

Applications of the GNSS-01 include; situational awareness, vehicle and asset tracking systems, surveying, mapping & GIS and time synchronisation for users such as Emergency Services, Police, Mining and Energy resources, Forestry and Governmental infrastructure services and Amateur HAM HF Radios/Transceivers. The GNSS-01 can also provide accurate time synchronisation for secure frequency hopping radios in applications such as Armed and Border forces, Police & Security and Coast Guard.

Conventional Global Navigation Systems use the US controlled GPS system, however in recent years additional satellite position systems have been launched. These include GLONASS (Russian) and BeiDou (China) and the QZSS (Japan) position augmentation system.

The GNSS-01 is able to receive signals from all these systems to provide a far more robust solution for positioning. The GNSS-01 has a 76 Channel receiver with industry leading navigation sensitivity. From 1^st power on the system gains position accuracy within 26 seconds, from hot start systems achieves accuracy within 1 second.

For security, military and other tracking applications the GNSS-01 provides additional benefits from its ability to provide increased immunity to jamming and spoofing techniques commonly employed in military countermeasures. The GNSS-01 has intelligent EW signal detection and using advanced algorithms is able to significantly reduce the impact to positioning data from the system. In locations where there is strong RF noise emanating from adjacent Radio transmitters the GNSS-01 employs advanced RF filtering techniques to reject these unwanted signals providing better operational utilisation. 

The GNSS-01 is an ideal system add on to military systems where it can be interfaced with situational awareness mapping systems as well as tactical radios systems that use the signal embedded with the voice and data communications to provide position information and time code for synchronisation purposes.

The GNSS-01 is able to interface with radio transceivers to provision position and time code for tracking and synchronisation purposes. The GNSS-01 is compatible with all standards based tactical radio systems from reputable manufacturers.

The full feature of the AT GNSS-01 are tabled below;

·       Concurrent reception of GPS, QZSS, GLONASS, BeiDou

·       76-channel receiver.

·       Industry leading –167 dBm navigation sensitivity.

·       Up to 18Hz update rate (single GNSS).

·       Positioning accuracy 2.0m CEP.

·       Acquisition Cold start 26sec, Hot Start 1 sec.

·       Embedded wideband and omnidirectional GNSS antenna.

·       Small rugged and waterproof IP67 enclosure.

·       Optional magnetic mount capability.

·       Exceptional jamming immunity with active CW detection and removal.

·       Operates from 10 to 35V DC.

·       Low current consumption.

·       RS232 9600 Baud NMEA data output.

·       Time pulse output.

·       Additional RF filtering for operation near radio transmitters.

·       5m interface cable, 6 conductor 28AWG

This unit is supplied with 6 way Molex connector (Part number 43020-0600)

Note. The GNSS-01 is suitable for use with a variety of 3^rd party applications. For example the unit is compatible with Codan™  NGT and Codan, Envoy HF Transceivers. E.g. For use with Toyota ™ Landcruiser Option Code: GPSNGT . The 6 way Molex connector will mate directly to Codan NGT and Envoy radios. 

Compatible with Codan GPS Enable Option Part Number 15-10486 or Interchangeable for Codan GPS receiver/antenna part number 08-05362-001. Significant saving over OEM units with superior performance.

The unit will also work with Barrett radios that accept external GPS unit but will require a connector to mate with Barrett radios. The existing connector can easily be cut and replaced. Pin out information is included with the GPS receiver. 

The GNSS-01 uses the uBlox CAM M8Q core chip. 

The units are completely new, unopened, unused, undamaged stock. Exchange warranty is provided up to 12months. Buyer pays return freight. Stock Ex Western Australia.