Welcome to our page!



For sale we have our custom made 5 x 110 Wheel Spacers/shims sold in pairs 


THESE SHIMS ARE PERFECT FOR ADDING CLEARANCE TO BRAKE AND SUSPENSION UPGRADES


SHIM FITMENT IS FOR VAUXHALL and SAAB

PLEASE CHECK YOUR VEHICLE FITMENT BEFORE PURCHASING


Spacers are 3mm wide giving 6mm overall increase across the axle.


These spacers are designed to fit a 65.1mm HUB and wheel bore


THE CENTREBORE OF THE SHIM MAY BE BIGGER DUE TO THE CHAMFER


One of the most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the spacer on to your existing hub.
  • Check the spacer is sitting flush against the original hub with no visible gap
  • Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the extended bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD. Visit www.watfields.com

Please contact us to discuss any enquiries you may have