Welcome to our page!

For sale we have our custom made 5x110 to 5x120 Wheel Adapters sold in a set of 4

20 x M12x1.5 shallow 17mm hex head bolts for fixing to the Hub

PLEASE NOTE THESE ADAPERS ARE TO FIT TRANSPORTERS T5 WHEELS WITH M14X1.5 WHEEL BOLTS

THESE ADAPTERS ARE MADE FOR FITTING 

TRANSPORTER 5X120 65.1 WHEELS ONTO A VAUXHALL 5X110 65.1 CAR

The adapter threads have stainless steel inserts for thread protection and a more secure fixing than standard threaded aluminium adapters.


Quick specs

CAR SPEC

• Hub bore - 65.1mm

• Hub PCD - 5x110

• Hub bolt thread - M12x1.5


WHEEL SPEC

• Wheel bore - 65.1

• Wheel PCD - 5x120

• Wheel Bolt thread - M14x1.5 (stainless steel insert)


• Fixing bolts - 20 x M12x1.5 17mm shallow head 


• Thickness - 20mm

• Quantity - 4


Adapters are 20mm wide giving 40mm overall increase across the axle.

These Adapters are designed to fit a

65.1mm 5x110 HUB and a 65.1mm 5x120 WHEEL

All our custom made spacers and adapters are manufactured from 6082 T6 MARINE billet Aluminium

One of the most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the adapter on to your existing hub and tighten up with the bolts provided.
  • Check the adapter is sitting flush against the original hub with no visible gap
  • Gently position the wheel on to the adapter spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the wheel bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.

Visit www.watfields.com

Please contact us to discuss any enquiries you may have