PS4 Pro Skins - Decals for PS4 Controller Playstation 4 Pro - Stickers Cover for PS4 Pro Controller Sony Playstation Four Pro Accessories with Dualshock 4 Two Controllers Skin
Vinyl skin for Sony PlayStation 4 pro console and Dualshock 4 wireless controller is printed with super-high resolution graphics and ultra viscosity.
PS4 pro console with faceplate and mods ps4 pro controller skins for PS4 pro games PS4 pro accessories are easy installed, removal and will not scratch, fade or peel.
Installation Instruction:
1) Clean the unit's surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminants. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of PS4 pro Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the ps4 pro console and controller skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
Package Contains:
- One(1) Skin for Sony PlayStation 4 Pro Console.
- Two(2) Stickers for Dualshock 4 Controller.
- Actual Console and Controllers not included.
