eBay

FDA Disclaimer

The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.

If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your

status as an authorized purchaser of this item before shipping of the item.

DESCRIPTION:

Function:

Used to heat composite resin material to improve its flowing effect; can also be used to heat manual instrument(s) for bonding.

With precise circuit to control the heating module, temperature tolerance is controlled within 1 Degree Celsius.

3-gear temperature: 40, 50, 70 Degrees Celsius

Features:

1. Warming the composite resin to approximately 39°C, making the material more fluid and reducing the resin extrusion time and minutes

The internal stress of the curing stage. Heating the resin heater temperature setting to 50°C can result in flow for cementation

Better composite resin.

2. Heating the anesthetic to body temperature can relieve the pain during infiltration.

3. According to the material and personal preference, the temperature can be set to: 40±1°C, 50±1°C and 70±1°C.

Usage:

Using "ON/OFF" button to turn on/off the heating body;

Select the required temperature--40, 50 or 70 Degrees Celsius (the default temperature of the heating body is 40 Degrees Celsius);

Insert the composite resin material (together with syringe)/manual instrument(s) into the hole of the heating body;

CAUTION:

Tighten the lid of the syringe when inserting resin composite material, to prevent the resin material from leaking inside

the heating body.

Cleaning and Disinfection:

1.All parts can be wiped clean with a cloth dampened with disinfectant.

2.Caution: Do not immerse any parts in any liquid to disinfect; be not autoclavable.

Technical Parameters:

-100% brand new and high quality

-Dental Aesthetic repair resin heater.

-Input Voltage: 100~240 V,US/EU plug;AC 50/60 Hz,0.8 A

-Output Voltage: DC 12 V 2 A

-Power: 24 W

-Temperature Setting: 40, 50, 70 Degrees Celsius

Package Included:

1 x AR Heater

1 x Power adapter(US/EU Plug)