SCION tC, xB, xA OEM LED ROCKER SWITCH - GREEN

Reviewer: Brandon (OKC)

This switch fit the blanks on the console of my Juke perfectly. Almost looks like factory stock. Great switch

Reviewer: Gregory Jones (Westminster, MD)

I originally bought this switch many years ago for my 06 xB for foglights. Well that never happened. I bought a 97 tercel with a bad 3spd automatic and swapped in a 4spd auto. I wired up the switch to control overdrive and used an existing hole in the center console. Fits perfectly and works well. I like how the light is not overly bright as some LEDs can be.

Reviewer: All (Texas)

The switch looks and functions great, although it does not use a LED indicator. It is an incandescent lamp with a colored cover. No biggie, to be fair the description does not say that it is a LED.

Reviewer: Nick (Syracuse, NY)

Bought this for my 2008 scion tc slight trimming was needed but it looks neat and clean satisfied with my purchase

Reviewer: Ian (Campbell, CA)

The 2nd Gen' Tundra is a "%&^#" to find add-on rocker switches. I bought a, Scion OEM Style Lighted Rocker Switch and a Scion OEM Style Rocker Switch - Momentary, for an electric Air Horn/PA. I trimmed the top and bottom of a couple blank holes and the switches snapped in perfect and look great.

Reviewer: Jim Berger (Greentown, PA)

Used this switch to replace poor fitting switch that came with aftermarket driving lights.Aliittle filing on sides and top made for nice tight fit.Mine came with spade ends,wires pluged rlght in. The Red indicator light is bright.Looks like factoryonly better.It shipped fast , 3 days. Will be Buying from Ozniun in the future.

Reviewer: Kris K (West Milford, NJ)

I bought two of these switches for my Girlfriends 2003 Toyota Corolla to replace a blank plate and a small coin tray.
I'm using the to switches control her aftermarket fog lights and interior leds
These switches worked great and stock look to them.
I posted a photo of them in actions.
There was no trimming or cutting required.
They will fit a 2003 - 2008 Toyota Corollas with no problems

I'm super happy with the switch's.
However the only complaint I have is Indicator light is not very bright.
But still a great item and I highly recommend it if you looking for a clean and easy install..............

Reviewer: Electrican (Wisconsin)

Fits my 2003 Tacoma cutouts perfect. Looks very good. Three stars for that.

Problem was when tightening the screw terminals the connection between screw tab and switch breaks very easy. It is a weak riveted connection from tab to switch body. When I asked Oznium if I could place a second order for tab style switches the reply was:
"We have zero inventory for the spade style switches, and have no plans to stock them anytime soon. Sorry about that.
You may consider soldering the wires for a more secure connection."

I will have to find something else to replace the switches I purchased. Might be ok if you are only powering a few LEDs but I was planning to use a higher current load and the loose terminals will become a weak, hot spot in the circuit.

My advice is to find a better quality switch unless you are very careful and the switch is powering a low current load.

Reviewer: Taylor W. Freel (North Las Vegas, NV)

I ordered these in green to replace some cruddy switches from autozone. When I got them I immediatly hooked it up to power and the light didn't illuminate. I tried all of the other ones I ordered and nothing. I called Oznium, and they were very quick to send me new ones. The new ones illuminate but in daytime I can hardly tell if they are on or not. So I am ordering new led's and will be modifieing the switch. Customer service is good but really wish I didn't have to modify it when they should already be bright.

Reviewer: Quang Nguyen (Isla Vista, CA)

I bought 4 Switches. 3xBlue 1xAmber. Scion TC 2008 Fits tightly and works great. Amber switch looks great.

Blue Switch is actually a warm white led behind a blue lens. I just thought it would be a blue led behind a blue lens. The white light and blue lens makes it look like a turquoise color

###
Note from Oznium.com:
They are not LEDs, but rather tiny incandescent-style bulbs. If you're not happy with the color, you're always welcome to send back for a refund.

Reviewer: Alex (aka chevycaprice9c1) (Trenton, OH)

i bought three of these switches for my 1998 subaru forester S to replace some of the empty switch spots. with a little trimming these switches will pop right into a 1998 forester and as far as i know most other Subaru's

awesome switch but a little pricey overall very work it for the factory look

Reviewer: Eltaco (BFE, CA)

I used this switch along with a relay harness to bypass the stock Toyota fog light switch. I wanted to be able to have my fog lights on without turning on the low-beams. Also it is nice being able to still have the road right in front of the bumper stay illuminated while using the high-beams. Fog lights tend to illuminate the sides of the road better for seeing hiding law enforcement officers on the shoulder.

Reviewer: Jake Daulton (Trabuco Canyon, CA)

I have had this switch installed for a couple months now and everything was working perfectly and the light looked great. But, a couple days ago the light went out. (Double checked the wires) the switch still works but its a bummer that it doesn't light up anymore. Im on coilovers so my car shakes like crazy, maybe the bulb couldn't take the stress.

Reviewer: Chuck in Raleigh (Raleigh, NC)

This switch will fit a 2006 Toyota Prius if you file mostly the top and bottom of the dashboard panel (one of the two empty cut-outs for switches); some minor filing of the two sides of the dashboard switch-opening is also required. I found it best to file the dashboard in stages (not too much at once on all sides) so that you can check the switch to when it fits. I only spent about 10 minutes filing/trimming to open the dashboard space; the switch outer-trim covers any possible "over-trimming" of the dashboard's modified opening, so long as you don't trim too much away.

Reviewer: Christopher Selepec (Thornton, CO)

I had the one were the amber lense fell out. I had the new switch in the mail FREE of charge before I had even check for a reply.

Cant say enough about the customer service! Thanks again and I just placed another order.

Reviewer: Eric M (Colorado Springs, CO)

I ordered these when they were advertised as LED switches and realized they were incandescent bulbs. The switches are nice quality and the action is firm and positive, but I need an LED lit switch to match my interior. I gave them 3 stars for being a decent switch, but couldnt give more because they were mislabeled when I bought them.

Oznium contacted me and resolved the issue immediately. The webpage was fixed right away as well. I am still looking for an LED switch but these guys really do care about customer satisfaction which is a huge relief for me. Thanks for your quick and timely help with this.

Reviewer: Christopher Selepec (Thornton, CO)

Installed 2 in the dash of my 2006 Tacoma. Install went good, however one of the amber covers for the light fell out. Not too happy about it. Now I have to buy another switch.

###
Note from Oznium.com
That's bizarre, never heard of the cover falling off. Anyways, a new switch is on its way to you. No need to buy another one.

Reviewer: Chris Jarvis (Oklahoma City, OK)

I ordered two switches for my 2010 Tacoma for driving lights and received them in less than a week. The switches appear to be very good quality and well made. I did have to trim the opening in the dash to install but that was expected. Trim the flanges on the SIDES flush with the rest of the opening and smooth them with a file. Then use a file or similar to remove just enough material from the bottom flange to slide the switch in for a snug fit. I also used a file to square-up the corners of the hole to make the installation just a little easier. Switch looks awesome when installed.

Reviewer: Christan S. Gonzales (Odessa, TX)

Well I was sitting outside talking about LEDs where my friend got his and where I got mine. When I was pretty sure that this would fit a monte carlo! So All enthusiasts of this beauty go ahead and try I know I am

Reviewer: Ryan B (RAF Mildenhall)

Just installed the amber switch in my 2004 SR5, it fits fine with a little filing of the dash opening(very little filing). Do not hesitate to buy this for the 4th generation 4Runners. It also helps to bend the terminals slightly to the inside.

Reviewer: Chris (Channahon, IL)

Great switch ... but doesn't fit 2010 Toyota Tundra without alot of cutting. Still the best looking OEM type switch out there!

Reviewer: Curtis Wyche (La Porte, TX)

I ordered this product on friday and it said 7 days for delivery to be completed and i got it the monday after so really fast delivery and also i have hooked it up to my cigarette lighter and ran it to four led bars and i love it. took two hours to install everything but like 30 seconds to put in the rocker switch itself so very easy installation.

06 Scion tC

Reviewer: Thomas Sykes (Bowie, MD)

Installed in my 2009 Tacoma. I did have to shave the interior plastic of the opening a bit to make it fit. The illuminated switch works well and was a breeze to install.

Reviewer: Danny Graham (Mckinney, TX)

I put this switch in my '09 Scion and it fit perfectly. I love it and it was so simple to install. Only downside is that it doesnt come in blue.

###
Note from Oznium.com:
Update - We've now added blue :)

Reviewer: Kelson Kai (Honolulu, HI)

Great switch, used it for the footwell LEDs in my friends truck, fits but with some shaving to the dash itself, didn't take more than 5 min. once the right file was found though. Nice glow, looks sick at night and very sturdy construction as well. Great OEM fit as well once in.

Reviewer: Kyle Dye (Wexford, PA)

I have been on this sight many times looking at all your great products. Then I was given fog lights. And they didnt come with a switch. I said to my self..."oznium.com!!" So I went on and of course you had the switches. Had to get the one with the led. Fit perfect! Couldn't be happier. Great product for a super price. And the shipping was super fast. Got it in two days. A+ guys! Will be ordering more in the near future!

Reviewer: Michael K. (Billings, MT)

Switches fit very well with just a little trimming of the stock hole. A nice addition to the factory switches and at a reasonable price. Will be ordering more in the future.

Reviewer: Omerta089 (Northbrook, IL)

Really good switch, and looks great inside. I'll post pics up soon. For those who bought one and it didnt fit, maybe measure first before buying next time?

Reviewer: Jeffrey Kim (Cerritos, CA)

I've been looking for a switch to fit my 07 Tacoma and I was so happy when I found this switch that supposedly fits Tacomas but when I finally got it, no matter what I tried it wouldn't get into my Tacoma. I ended up having to shave my dash -________- The screw terminals are a real pain too.

Reviewer: Jesus Rolando (Laredo, TX)

I just bought two switches for my 03 4Runner SportEdition, said it didn't fit but I figured I would give it a shot and sure enough I got both into the center console with a little shaving but they look great

Reviewer: William (Westchester, CA)

I wired everything in as instructed, the switch works, looks great, and fits perfectly, except the LED didn't work for some reason...

Reviewer: Jon D (San Diego, CA)

Mine came with screw terminals not spade terminals as described in the product description. It's not a big deal to me since IMO is provides a more secure connection, however some may not like this. I recommend you update your product description so people at least know they may not get exactly what they have ordered.

===
Note from Oznium:
Oops, sorry about that. Good idea - I'll update the description right now.

Reviewer: Sam J (WI)

Works and fits great in my 05 scion Xb. Glad I chose to get the switch with the light as it really helped me to know it was hooked up correctly.

If only it came in blue though.

Reviewer: Doug (Richmond, VA)

I popped this into the dash of my '05 Scion tC. It was effortless and much easier than I thought it would be.

4 stars only because I wish more colors were offered, namely blue.

Reviewer: Martin (Elkridge, MD)

I bought 3 of these. Thy do not fit at all. You need to clarify your applications that they do fit.

===
Note from Oznium:
Sorry for any confusion, but the application list clearly states that they do not fit the 2008 xB.

Reviewer: Robert (Orange County, CA)

I was excited to find someone who had a rocker switch that fit into a Tacoma, unfortunately when I received mine, it was a little too large for my '05. You might want to update your description. Otherwise it was very high quality, something I would be very happy with in my truck. The only improvement I could possibly think of is the click sound it makes when engaged, could be softer, but thats just me being picky. =)

Reviewer: Richard (Orinda, CA)

The descriptions says you can use .25" spade terminal connectors, but not true for mine. It came with screw terminals; spade connectors did not fit even with the screws removed, and the screw terminals are too small for 14g wire. I crimped on ring terminals to my wires for a secure connection. Otherwise it is a high-quality switch and fit perfectly in the dash blank on a 1997 Tacoma truck.

===
Note from Oznium: Sometimes they'll come with spade terminals, sometimes they'll come with screw terminals, it just depends on the batch we get from the factory. Sorry for any trouble!