PLEASE NOTE: The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide, 3/16″ thick and have a 15/16″ center hole. This will fit most Exmark and Toro units with the spline. Make sure the Toro doesnt have the factory blade block on the bottom of the spindle.
Pro Tip: add longer bolts to get more threads; grade 8, 2 1/2” long, 1/2” fine thread or at any hardware store
The X-Blade Dual Mulching Blade Adapter holds your original blade and an additional mulching blade at a perfect 90 degree angle. Your original blade (lower) will give the clean height of cut and the mulching blade above, with multiple cutting edges, pulverizes the cut grass as it cycles through the deck chamber dramatically reducing grass clipping size.
With the use of the X-Blade Dual Mulching Blade Adapter Kit you can not only mulch but bag more efficiently as well. This kit allows you to bag the grass with more vacuum and grass packing than ever before, as well as side discharge with confidence.
Also, when using The X-Blade Dual Mulching Blade Adapter Kit, you are ensuring a perfect balance to the machines blade spindles, which will not allow blade slippage, which can cause a blade to over torque and become nearly impossible to remove.
The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide, 3/16″ thick and have a 15/16"″ center hole.