Features:
-Bulb Size: H8
-Application: Headlight / Fog Driving Light / Daytime Running Light
-100% Brand New and High quality.
-Use SMD Led technoloty, amazing super bright lighting
-LED Type: Samsung LED chip high power
-Beam Type: 360°Beam Angle
-Color Temperature: 3000K Yellow, Pure Yellow
-1A current, 12W Working Power
-Lumens: 1500LM/Bulb
-Working Voltage: DC 9V to 30V
-High power, Brightness can compare with other 100W bulbs, Low Power Consumption 12W
-No delay to light up, Faster on/off response time
-Lifespan: 80000 working hours ,Adopt imported chips, stable quality, long service life
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes:
2 x LED Bulbs H8 3000K Yellow
Q: Do I need a load resistor for my LED turn signal light?
A: Yes, Load Resistors are required to avoid hyper flashing by helping your vehicle read a correct current unless you have an electronic flasher relay installed.
Q: Do I need a decoder for my LED headlights, foglights and DRL?
A: For most newer vehicles in certain brands, including most European brands, Dodge, Jeep... Yes, Decoders or Resistors are required to eliminate Error Code or Flickering.
Q: Will they fit my vehicle?
A: If your vehicle does not show up on the compatibility table at the top of our listings, please feel free to contact us get the correct bulb.
Q: Are they plug and play?
A: Yes, unless your vehicle requires additional adapters to secure LED bulbs in place, the most common one is vehicle with a H7 bulb. Please contact us for more support.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior
light shield of the headlight when adjusting the bulb.