TECFEED 250i ARC VOLTAGE WIRE FEED UNIT

 

The Tecfeed 250i is an Arc Voltage MIG wire feeder which plugs directly onto CC or CV power sources such as engine driven welder generators &

other DC powersources.

 

The TECFEED 250i feeder is a robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the elements. Due to rugged construction they are ideal for all site welding in harsh environments & also are very portable. The Tecfeed 250i takes 15kg spool sizes and is fitted with an extra heavy duty contactor with oversize contacts to allow welding up to 350A. This machine comes with a 2 roll geared wire feed system capeable of pushing various sizes of hard wires and flux cored / gassless wires.

 

*Can be connected to virtually any DC welding power source in seconds,

Engine driven, MMA / TIG / MIG etc.

 

*Excellent performance with flux cored and solid welding wires with unbeatable arc stability.

 

 

*Rugged design to give a long trouble free life in less than ideal conditions.

 

*Very portable design with strong ergonomic carry handle which lays flat when not needed

 

*A very heavy duty contactor is fitted to start & stop the arc & cope with current up to 350A.

 

*Torch trigger latching & burn back control standard

 

*Standard Euro torch connection

 

*Front controls have a sturdy guard either side to give protection from damage

 

*Protected to IP23 so is protected against splashing water & can be used outdoors

 

*Works with any open circuit voltage from 20-110V & factory tested to

150V to guarantee reliability

 

*Takes 15KG spools    

 

Options; Digital meter, gas flow meter, non inline versions available,

If you have a special requirement we can probably make it.

 

       

Technical specs           TECFEED 250i        

Amps & duty cycle     250A@60% max        

Max OCV                  110V DC                   

Welding voltage          15-44V                       

Wire speed range        2-20metres/min          

Wire feed type             2 roll geared

Wire size                     0.8-2.4mm                  

Size approx                 170w, 60l, 360h mm 

Weight approx            8kg                           

 

ONE YEAR (RTB) WARRANTY INCLUDED.

PLEASE VIEW OUR OTHER ITEMS FOR SALE INCLUDING VARIOUS OTHER MIG AND TIG TORCHES, AND A UNIVERSAL WIRE FEED ASSEMBLY KIT, AND GAS SOLENOIDS.

TEC ARC is a leading manufacturer and repair centre of arc welding machines. We have been designing, building and repairing all types of welding equipment in the UK for over 20 years. All new machines are built to a very high standard, using quality components and all comply with CE requirements. New machines are sold with a  1 year return to base warranty. Conditions of return to base (RTB) warranty are as follows: The machine will be repaired free of parts and labour for 1 year from the date of dispatch from our works. The purchaser is responsible for shipping charges to us. Tec arc will pay for return to the customer. There will be a charge if the fault or damage has been caused by mis-use by the purchaser or if no faults can be found with the machine. Because we design and manufacture welding machines, parts are kept in stocked, on our premises, and full technical back up is given if required. Any of our products can be demonstrated and collected at our premises:

Any further information you require about us or any of our products please send us a message.

Delivery is free to most main land UK destinations. Please contact us for cost to other destinations.