NES1-015LB
1 & 3 -phase 200V class
Models NES1-			004SB	007SB	015SB	022SB		Brochure
			004LB	007LB	015LB	022LB
Applicable motor size		kW	0.4	0.75	1.5	2.2
		HP	1/2	1	2	3		Quick Reference Guide
Rated capacity (kVA)		200V	0.9	1.3	2.4	3.4
		240V	1	1.6	2.9	4.1		Instruction Manual
Input Rating	Rated input voltage (V)		SB: 1-phase 200 to 240V +10%, 115%, 50/60Hz ±5%
			LB: 3-phase 200 to 240V +10%, 115%, 50/60Hz ±5%
	Rated input current (A)	SB	5.8	9	16	22.5
		LB	3.4	5	9.3	13		For technical questions specific to your application contact us.
Output Rating	Rated output voltage (V)		3-phase: 200 to 240V (proportional to input voltage)
	Overload capacity (output current)		150% for 60 sec.
	Rated ouput current (A)		2.6	4	7.1	10
Enclosure			IP20					1 YEAR MANUFACTURERS WARRANTY
Cooling method			Self-cooling		Force ventilation
Weight (kg)		SB	0.8	1	1.2	1.3
		LB		0.9

Item				General Specifications
Control	Control method			Line-to-line sine wave pulse-width modulation (PWM) control
	Carrier frequency			2kHz to 15kHz (derating required depending on the model)
	Output frequency range			0.1 to 400Hz
	Frequency accuracy			Digital command: ±0.01% of the maximum frequency
				Analog command: ±0.4% of the maximum frequency (25°C ±10°C)
	Frequency setting resolution			Digital: 0.01Hz; Analog: (max. frequency)/1000
	Volt./Freq. characteristic			V/f control, V/f variable (constant torque, reduced torque)
	Protective functions			Over-current, Over-voltage, Overload, Overheat, Ground fault at power-on, Input over-voltage, External trip, Memory error, CPU error, USP error, Driver error, Output phase loss protection
Input Terminal	Specification			10kohm input impedance, sink/source logic selectable
	Functions			FW(Forward), RV(Reverse), CF1-CF3(Multispeed command), JG(Jogging), DB(External DC braking), SET(Second motor constants setting), 2CH(Second accel./decel.), FRS(Free-run stop), EXT(External trip), USP(Unattended start protection), SFT(Software lock), AT(Analog input selection), RS(Reset), STA(3-wire start), STP(3-wire stop), F/R(3-wire fwd./rev.), PID(PID On/Off), PIDC(PID reset), UP/DWN(Remote-controlled accel./decel.) , UDC(Remote-controlled data clearing), OPE(Operator control), SF1-SF3(multispeed bit), OLR(overload restriction selection), LAC(LAD cancellation, ADD(ADD frequency enable), F-TM(force terminal mode), KHC(cumulative power clearance), AHD(analog command holding), HLD(retain output frequency), ROK(permission of run command), DISP (display limitation), NO(Not selected)
Output signal	Intelligent output       terminal		Specification	27V DC 50mA max open collector output, 1 terminal,  1C output 250V AC/30V DC 2.5A relay (AL0, AL1, AL2 terminals)
			Function	RUN(run signal), FA1(Frequency arrival type 1 - constant speed), FA2(Frequency arrival type 2 - over-frequency), OL(overload advance notice signal), OD(Output deviation for PID control), AL(alarm signal), DC(Wire brake detect on analog input), FBV(PID Second Stage Output), NDC(ModBus Network Detection Signal), LOG(Logic Output Function), ODC(analog voltage input disconnection), LOC(Low load), FA3(Set frequency reached), UV(Under voltage), RNT(Operation time over), ONT(Plug-in time over), THM(Thermal alarm signal), ZS(0 Hz detection signal), IRDY(Inverter ready), FWR(Forward rotation),RVR(Reverse rotation), MJA(Major failure)
	Monitor output terminal		Function	PWM output; Select analog output frequency monitor, analog output current monitor or digital output frequency monitor
Operator	Operation key			1 unified key for RUN/STOP/RESET
				ON : this key has function of "RUN" (regardless run command sorce setting (A002/A201)
				OFF: this key has function of "STOP/RESET"
				When optional oerator is connected, operation for key is disabled.
	Status LED interface			Control power supply LED (Red),LED during operation (yellow-green),Operation button operation LED (yellow-green),LED during tripping (Red), 4LED in total
Operation	Frequency Setting		Operator Keypad (option)	Up and down keys / Value settings or analog setting via potentiometer on operator keypad
			External signal	0 to 10V DC or 4 to 20mA
			Serial port	RS485 interface (Modbus RTU)
	FW/RV Run		Operator Keypad (option)	Run key / Stop key (change FW/RV by function command)
			External signal	FW Run/Stop (NO contact), RV set by terminal assignment (NC/NO), 3-wire input available
			Serial port	RS485 interface (Modbus RTU)
Environment	Operatng temperature			-10 to 50°C (carrier derating required for ambient temperature higher than 40°C
	Storage temperature			-20 to 60°C
	Humidity			20 to 90% RH
	Vibration			5.9m/s2 (0.6G), 10 to 55 Hz
	Location			Altitude 1,000m or less, indoors (no corrosive gasses or dust)
Other functions				AVR (Automatic Voltage Regulation), V/f characteristic selection, accel./decel. curve selection, frequency upper/lower limit, 8 stage multispeed, PID control, frequency jump, external frequency input bias start/end, jogging, trip history etc.
Options				Remote operator with copy function (WOP), Remote operator (OPE-SRmini, OPE-SR), Operator (NES1-OP), input/output reactors, DC reactors, radio noise filters, LCR filter, communication cables (ICS-1, 3)