AutoPartsMaMa
Title : Drop Lowering Kit 4" Rear Hanger Shackles For GMC C15 Chevy C10 Pickup 73-87 2WD



Fitment:

  • For Chevrolet C10/R10 1973 - 1987
  • for GMC C15 /C1500 / C1500 Pickup 1973-1987
  • Note: for 2WD and short box only

Specification:

  • Placement on Vehicle: Left, Right, Rear
  • Drop Length: 4in.
  • Drive Model: 2WD Only
  • Material: Steel
  • Package Size: 36.5*19*15.5cm
  • Package weight: 7kg
  • Surface: Powder coating

Package Includes:

  • 2x Rear Drop Shackles (1.5" / 2" Adjustable)
  • 2x Rear 2" Drop Leaf Spring (Gunmetal Gray Steel)
  • Necessary hardware included

Installation Tips:

How to Install a Leaf Spring Hanger?

  • Replacing a leaf spring hanger is rather easy. The leaf spring hanger installation consists of a few simple steps.
  • You should lift your truck with a jack and place it onto jack stands.
  • Then you should remove the front leaf spring from the hanger.
  • Grind off the rivets that are holding the hanger and then hammer them out.
  • Bolt the leaf spring hanger kit into the frame where the previous rivet holes were.
  • Bolt the leaf spring to the hanger. The tricky part of the installation will be taking the rivets off.

How to Install or Replace Leaf Spring Shackles?

  • Using a floor jack, raise the rear differential of your vehicle off the ground, Use jack stands under the frame to support the vehicle
  • Lower the jack so that the suspension "droops", this will take the weight of the vehicle off the shackle and allow for removal of the mounting bolts
  • Remove the lower mounting bolt from the shackle and spring and then lower the axle so that the spring drops out of the shackle
  • Remove the upper mounting bolt which attaches the shackle to the mount on the frame then remove the existing shackle
  • Insert the new shackle and mounting bolt.
  • Leave the bolt loose to allow alignment of the shackle with the spring
  • Raise the rear axle and align the spring eye with the shackle. Slowly work the spring back into the shackle, raising the jack a little at a time until the holes in the shackle and the spring eye line up.
  • Install the mounting bolts through the shackle and the spring. Make sure to tighten accordingly
  • Jack up the car to remove the jack stands then lower the vehicle back down
  • Make sure the bolts stay tightened with weight on them


Free 2 Year Warranty:

All AutoPartsMaMa products have 2 year warranty (unless otherwise stated).In the very unlikely event that you have a problem with our product, please contact us via eBay messages.


Easy Return:

If you are unhappy with your purchase for any reason, you can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/eBay costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.


If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.

Important notice:

1. Any returned item(s) without Return authorization number will be rejected.

2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.

3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.

4. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, the updated result will be informed.


If you have made a mistake on purchase and wish to cancel the order before it is dispatched please contact us by ebay message as quickly as possible.


Note:

All parcel will be collected by carrier at 8:00am on Monday to Friday.


Copyright © 2018 CQGG. All rights reserved. Terms of use
Powered By CQGG