Direct from Michigan Manufacturers
that have the knowledge of being in business for decades!
that have the knowledge of being in business for decades!
Compare our prices to any worldwide competitor for the same part and save!
Because our products are built of high quality aluminum to outlast the OEM specifications, we proudly GUARANTEE Our Product for LIFE!
Replace plastic doors with aluminum, fix it once, fix it right!
Because our products are built of high quality aluminum to outlast the OEM specifications, we proudly GUARANTEE Our Product for LIFE!
Replace plastic doors with aluminum, fix it once, fix it right!
BEFORE YOU CLICK TO BUY THIS PART, READ THIS:
This is the ultimate fix that completely disregards the plastic. It consists of a one piece solid Aluminum door foamed with automotive approved foam. It also contains a solid Aluminum driver that allows the drive motor to drive the door. In most cases you must take the housing out of the vehicle to replace the drivers against the fire wall on the vehicle
( located in ITEM SPECIFICS under SELLER NOTES describes exactly what the listing contains )
There is an advantage for you, the customer, by using the Blend Door USA products. You will never have a door that will break because of the extremes of heating and cooling under your dash. Our products have undergone strenuous testing in the field and in our testing labs, and have proven that our products do not fail.
We have produced over 100,000 doors with zero product failures!
This is a picture of a broken OEM plastic door. Plastic fails for numerous reasons in this case temperature extremes of hot dry air and cold air making the doors brittle and prone to breakage. This is a critical problem, and the door must be replaced. ***PLASTIC DOORS FAIL***
Replacing the door with our high quality aluminum product means you will never again have a broken door!
This is a picture of the OEM plastic driver you will have to use from your original heater box if you buy our OEM style door at a discounted rate. These drivers, unlike the door, are a solid piece. They seldom fail, due to the fact they are solid, not hollow like the door.
If you prefer to use a solid Aluminum driver find our listings that supply them with the door.
(located in ITEM SPECIFICS under SELLER NOTES, or IN MAIN PICTURE)
Replacing the door with our high quality aluminum product means you will never again have a broken door!
This is a picture of the OEM plastic driver you will have to use from your original heater box if you buy our OEM style door at a discounted rate. These drivers, unlike the door, are a solid piece. They seldom fail, due to the fact they are solid, not hollow like the door.
If you prefer to use a solid Aluminum driver find our listings that supply them with the door.
(located in ITEM SPECIFICS under SELLER NOTES, or IN MAIN PICTURE)
About Us: Blend Door USA is comprised of business owners that have had the experiences of being in business for decades. We have supplied the auto industry with details (prototype parts) and production runs (in excessive of a half million pieces). We have various abilities that contribute to the excellence of the product we produce for you. Blend Door-USA takes great pride in the products we can offer (you) our customers, with AMERICAN MADE QUALITY and PRICING THAT STRIVES TO BE THE LEAST EXPENSIVE IN THE MARKET!!!
Shipping: Items are shipped daily at 3:00 PM EST upon receipt of payment. Orders received by 2:00 PM EST will ship the same day! We gladly ship overseas, with calculated shipping upon checkout
Do fleet work? We offer discounts for orders of 5 or more of the same part! Please wait to pay until we can submit a revised invoice to you.
Questions? Contact us! Questions will be answered daily between the hours of 8-9:00 AM EST and 12-2:00 PM EST.
Our Guarantee:
Blend Door-USA GUARANTEES OUR PRODUCT FOR THE FUNCTION OF THE PART. This part has to be tested to the specifications of the original product and has far exceeded its capabilities. There will be no guarantee on parts that have been altered by circumstances that are not due to the use of the product. (In layman terms, don't try to put our products in a vice and use a pipe wrench to twist a component to get a free replacement!)
The Guarantee works when you E-mail your problem to blendoorusa.com. Blend Door-USA will give you a complaint number to send back with your door. You send the door/doors back to Blend Door-USA, with your complaint number. Upon arrival at Blend Door-USA, our testing lab will confirm reasons for your difficulty (providing it was not altered by an outside source of torque). Blend Door-USA will send you a replacement at no charge. This guarantee is for a product replacement not for money back. Blend Door-USA only guarantees products and components that have been shipped to you.Send a copy of your payment to Blend Door-USA as proof of purchase.NOTE; WE ONLY GUARANTEE DOORS WITH PROOF OF PURCHASE OF PAYMENT TO BLEND DOOR-USA.
NOTE: WE AT BLEND DOOR-USA HAVE BEEN INVOLVED IN PRODUCING DOORS IN EXCESS OF 100,000 WITH NO FAILURES!
A special note to our customers on door actuators:
We have had several customers contact us with reports of a clicking noise while trying to change modes and a loss of airflow control. This clicking noise is the result of a failed door actuator; more specifically, it is because the teeth on the plastic gear inside have sheared and are now slipping. Nearly all of these failures have been traced back to using an aftermarket door actuator in the vehicle. Several of these aftermarket actuators failed while using the stock plastic doors, and several have failed after our aluminum doors were installed.
So why do these actuators fail? Most electronic actuators do not have any limit switches inside to signal when the actuator has reached full open or full closed. Instead, they rely on the actual door to stop the movement of the actuator. When the door is commanded open or closed, the actuator will continuously turn until the door is pressed against the housing. After the door touches the housing, the actuator continues to try to move it even though there is no movement left. This causes the electric motor inside the actuator to draw more current while it tries to move an unmovable object. The vehicle?s computer detects this change in current draw and cuts power to the circuit. This is repeated every time a door is cycled from one position to the other.
This is the exact reason why the plastic doors fail. The plastic door is not strong enough to withstand the force that the actuators place on them, which causes them to split. Our aluminum doors are significantly stronger than the OEM plastic pieces or any aftermarket alternative and therefore will not fail. The makers of aftermarket actuators know that the originals are stronger than they need to be for the plastic doors, so they have chosen to make a weaker replacement to lower the manufacturing cost. The failure of an aftermarket actuator is not due to the design or the weight of the door itself, but rather the fact that they are not strong enough to withstand the forces applied when the doors contact the housing.
Many customers choose to do a full rebuild of the HVAC box while it is out of the vehicle to eliminate any possible failure in the near future. This typically includes a full set of our aluminum doors, a new evaporator, new heater core, and all new actuators. While there is no harm in replacing everything, the problem comes when people decide to purchase and install aftermarket door actuators. These actuators are not nearly as strong as the OEM actuators. Failure of these actuators can happen immediately, or after several years of use. Generally, replacement of an actuator requires the dash to be pulled out of the vehicle again.
Considering all of the feedback we have received about aftermarket actuators, Blend Door-USA strongly recommends that you reinstall OEM actuators back into your vehicle.
This kit replaces 3 doors and 3 drivers. You must reuse 1 steel door and 1 metal bracket. We supply the foam to replace the steel door foam. We also supply foam to reseal the box and the firewall. You cut the foam to fit. All foam used is a Synthetic Polyether Open-Cell Foam. Lifetime replacement warranty with proof of purchase from Blend Door-USA. Parts must not be altered by any circumstance that this part is intended for in the heater box.This is not a money back guarantee it is for part replacement. All is explained at the end of this listing under OUR GUARANTEE.