Light weight small long LW1650 portable shortwave antenna 1.6-50MHz

Description

• product description:
  
  Frequency range: 1.6-50 MHz
  
  Impedance: 50 Ω
  
  Power: QRP 5Watts
  
  Polarization mode: Horizontal
  
  Radiation direction: Omnidirectional
  
  Interface: SMA /BNC
  
  Antenna length: 16.2m
  
  The kit includes:
  
  A: Coaxial cable 6m
  
  B: Pull cable 6m x 2
  
  C: antenna element 16.2m
  
  D: Balun 9:1
  
  E: SMA To BNC adapter
  
  
  Portable long antenna
  
  The portable long line antenna is a simple kit that contains all the necessary components. It is a simple and effective shortwave antenna that can be quickly deployed. With light weight, small size, easy to carry and easy to set up. Widely applicable to shortwave, medium wave duty listening and QRP radio transmission. Suitable for outdoor camping, emergency communications and other temporary locations. (To permanently fix the erection, it is necessary to strengthen the strength of the cable and Balun's waterproof)
  
   The antenna assembly includes about 16.2 meters of insulated copper wire (antenna vibrator), 12 meters of pull wire rope (split into two rolls), 9:1 Balun, 6 meters of 50 ohm coaxial feed and an SMA to BNC adapter .
  
   This installation is simple and does not require welding. The height of the antenna is set as high as possible. Need to stay away from buildings, trees or other large objects. The ideal installation site requires a space of about 25 meters. If the space is too small, you can trim the excess hauling rope, but at each end of the antenna element and support structure, each side should not be shorter than 1 meter (3-4 feet). If it is still too long, you can shorten the antenna element. But this will reduce the efficiency of the antenna.
  
  
  Set up on the roof is a good choice. Because the reinforced concrete structure of the floor, will block some of the various electrical appliances in the building to generate a variety of interference signals, and the surrounding environment is relatively open to the antenna to receive signals.
  
  It is not a good choice to set up between two buildings. Because the building is a reinforced concrete structure, it will block the absorption signal. Various interference signals generated by various appliances in the building will radiate through the windows and be received by the antenna.
  
  When installing the antenna, pay attention to safety. Prevent falling! Tools fall! Electric shock and other dangers occur
  
  Package :
  
  1 set