Oilite® Light Duty Dry-Running Thrust Bearing for 1-1/2" Shaft Diameter, Acetal

Condition: New

***As of 12/24/25 there are 3 of these left, all brand new with varying packaging: 1 in manufacturer bag bag, 1 open with Mfr bag, 1 open without Mfr bag. They will be shipped in that order, as sold.

Item Specifications:
Bearing TypePlain
Plain Bearing TypeThrust
For Load DirectionThrust
MaterialAcetal Plastic
For Shaft Diameter1 1/2"
ID1.5"
ID Tolerance0" to 0.005"
OD3"
OD Tolerance-0.005" to 0.005"
Thickness1/8"
Thickness Tolerance-0.005" to 0.005"
Dynamic Thrust Load Capacity600 lbs. @ 30 rpm
ColorWhite
LubricationNot Required
For Shaft TypeRound
Temperature Range-20° to 180° F
RoHSCompliant

Use where high loads and speeds are not required.

Acetal bearings have low moisture absorption and are more chemical resistant than nylon bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.



Dimensions & Tolerances

Nominal ID:
1.5000"
ID Max:
1.5050"
ID Min:
1.5000"
Nominal OD:
3.0000"
OD Max:
3.0050"
OD Min:
2.9950"
Length:
0.125"±0.005











Regulations

USDA-H1 Certified
Food Contact Certified
Lead-Free
Self-Lubricating
Dry Running
Supplemental Lube
Conflict Mineral Free
RoHS Certified
Reach Certified

Engineering Preferences

Conducts Electricity
Washdown
Corrosion Resistant
Ultra Precision
Electrical Insulation
STEAM

Heat & Pressure Ratings

Max Temp F
180°
Min Temp F
-40°
Max Temp C
82°
Min Temp C
-40°
Max P
psi 1,000
Max V
ft/m 1,000
Max PV
lb-ft/in2-min 2,700

Press Fit

Housing Bore
3.0009±0.0005
Shaft Diameter
1.4951±0.0002

*Reported values need to be verified for each application*