M6 TITANIUM Ti Hex Head Flange Bolt-10 15 20 25 30 35 40 45 50 55 60 65mm x1.0mm
M6 Flange Hex Bolt in a natural finish. CNC machined head with reduced head height and deep bowl to further reduce weight without compromising strength.
These bolts accept an 8mm socket or spanner.
The thread pitch is 1.0 mm (standard metric coarse thread)
Common upgrade size on many Sports/Super Bikes and Karts
You will only pay P&P once regardless of quantity.
Please see our feedback- Our customers are impressed with the quality of our components and speed of delivery to the UK and worldwide.
These are by design, substantial bolts and bring a considerable weight saving when replacing steel.
These bolts are often located in a position that makes them particularly susceptible to corrosion and therefore Titanium upgrades are an obvious choice both in terms of weight saving, appearance and performance.
- These components are manufactured in Ti-6Al-4V Titanium alloy which is usually reserved for aerospace applications.
- These components have amazing strength and will give about a 50% weight reduction when compared with steel.
- Ti-6Al-4V (also known as Gr 5) has fantastic corrosion resistance and will look stay looking good for its entire lifetime.
All RaceTi bolts are made to exacting standards using the following procedures and specifications.
- The Head is forged and then CNC machined.
- A reduced head height is applied and a deep bowl machined into the head to further reduce weight.
- The threads are rolled onto the bolt shaft to reduce stress raising areas caused by machined threads used on some bolts.
- The finished part is shot peened and polished to give an attractive high quality finish.
- Compliant with relevant standards, Deutsches Institut Fur Normung (DIN) with regard to shaft dimensions, thread and tolerances (note that the head height is reduced compared to a DIN standard bolt)
These bolts have been used extensively by European bike and motorbike racers for many years. They will look great and add performance to you and your machine.
**All Titanium bolts should be assembled using a suitable anti-galling compound such as copper grease**
*buyer assumes all responsibility for checking that these items are the correct size for the intended application*
