SAA1099P SOUNDCHIP INTERFACE

Designed for RC2014 and compatibles.

This Buy-It-Now item is a brand new 

SAA1099P Soundchip Interface

for using with the RC2014
and compatible systems sharing the same I/O bus.


The SAM Coupe (A British Z80 based 8-bit micro, released in December 1989) has been my computer of choice for the last 33 years so bringing its sound chip, the Philips SAA1099P, over to the RC2014 / compatibles ecosystem was a no brainer, especially following a request to ask if it was possible!

The SAA1099P can considered to be very similar to using two AY sound chips, although with a few changes such as stereo volume controls. It offers 6 sound generators, each can then select from 8 octaves and 256 tones per octave (giving a frequency range of 31Hz to 7.81KHz). Two noise generators and two envelope controllers. Each channel has separate volume settings for left and right volume so stereo effects and panning are easily achieved.

Like my other interfaces the I/O port can be selected with jumpers to select the port used to avoid clashes with other hardware you have, as well as using multiple cards of the same type in your system to increase the number of sound channels. The soundchip is socketed and tested, with an 8MHz oscillator fitted to drive it at the correct frequency. A standard 3.5mm stereo socket is provided for the audio output.

The interface has a 39-pin connector on the bottom, for plugging into RC2014 / RC2014 extended, and the 80-pin RCbus connectors.

(This interface can also connect to the ZX Spectrum - see my other listings for the ZX-RC Bus Adapter I produce to give two RC2014 expansion ports to the Spectrum!)

---------------------------------------------------------------------

If you have any questions or queries please feel to ask!