Commodore 1541-II & 1581 FDD PSU BASIC by Electroware

Modern, safe and reliable replacement power supply

Electroware Commodore 1541-II and 1581 replacement power supply

Stay original! Choose the genuine Electroware 1541-II / 1581 FDD PSU – a proven replacement power supply trusted by retro enthusiasts worldwide.

THIS LISTING IS FOR THE BASIC VERSION WITH UK MAINS PLUG

Protected and stabilised 5V & 12V outputs, factory calibrated for Commodore 1541-II / 1581 drives.

Available colours: BLACK or GREY

SPIN YOUR DISKS UP SAFELY

Commodore 1541-II and 1581 floppy drives contain sensitive logic electronics as well as the drive mechanism. An ageing original power supply can expose valuable vintage hardware to unstable or incorrect supply voltages.

After decades of service, original power bricks may become unreliable or fail completely. At the same time, working Commodore disk drives are becoming increasingly difficult to replace.

A modern, properly protected replacement PSU is one of the simplest ways to help protect your original hardware and keep it operating for years to come.

Electroware Commodore 1541-II and 1581 replacement PSU
Commodore 1541-II floppy drive powered by Electroware replacement PSU

IT IS HISTORY. IT IS LEGEND. LET IT LAST SAFELY.

The PSU provides a clean, stabilised and protected 5V DC output up to 2.0A for the drive electronics and a stable 12V DC output up to 0.5A for the motor section.

The power supply is factory calibrated for the reference load of Commodore 1541-II / 1581 drives and includes multiple electrical protection features.

The electronics are housed in a compact, professionally manufactured enclosure providing ventilation, mechanical protection and electrical isolation.

WHY NOT EVERY CHEAP POWER SUPPLY IS A GOOD IDEA?

Cheap replacement adapters for the Commodore 1541-II can sometimes be found online. Many of them are generic power adapters fitted with a compatible connector rather than power supplies specifically designed for Commodore floppy drives.

A dedicated replacement PSU should provide stable voltages, suitable protection for the sensitive 5V logic rail and reliable operation with the 12V motor load.

With vintage hardware that is increasingly difficult to replace, the quality of the power supply matters.

DESIGNED WITH THE COMMODORE COMMUNITY

Electroware replacement power supplies have been developed and refined using practical experience with original Commodore hardware and feedback from retro-computing users around the world.

Our designs focus on what matters with vintage hardware: stable voltages, effective protection, reliable components, professional construction and long-term serviceability.

This is a dedicated retro-computing power supply – not simply a generic consumer adapter fitted with a Commodore connector.

Commodore system with 1541-II drives and Electroware power supply Original Commodore 1541-II power supply and Electroware replacement PSU

1541-II / 1581 PSU BASIC FEATURES

  • Compatible with Commodore 1541-II and 1581 floppy disk drives
  • Stabilised, filtered and protected 5V DC / 2.0A logic output
  • Stable 12V DC / 0.5A motor output
  • Over-voltage protection on the 5V DC line
  • Over-current and thermal protection
  • Factory calibrated for Commodore 1541-II / 1581 reference load
  • Fully isolated design
  • AC and DC protection
  • Illuminated Power On/Off switch
  • Long 1.8m output cable
  • Round 4-pin DIN Commodore drive connector
  • Universal AC input for worldwide use
  • Detachable standard IEC C7 "figure-8" AC cable
  • Compact and lightweight – approximately 0.3 kg
  • Cool and quiet operation
Electroware Commodore 1541-II and 1581 BASIC replacement PSU

UK AC POWER CABLE INCLUDED

This listing includes a UK IEC C7 ("figure-8") mains power cable at no extra charge.

The AC cable is detachable and can easily be replaced with another standard IEC C7 cable if the PSU is later used in another country.

ONE PSU – WORLDWIDE USE

The power supply itself is universal and is not manufactured as a separate UK, EU, US or Australian electrical version. Only the detachable IEC C7 mains cable changes according to the local wall socket.

This listing is supplied with a UK mains cable. For customers requiring an EU mains cable, please choose our separate EU-plug listing.

AVAILABLE IN BLACK OR GREY

Select your preferred enclosure colour using the Colour selector at the top of the listing.

Black and Grey versions are electrically identical.

Black and grey Electroware Commodore replacement power supply Electroware Commodore 1541-II and 1581 power supply

PROFESSIONAL BUILD QUALITY

TESTED BEFORE SHIPPING

Every Electroware 1541-II & 1581 PSU is triple-tested before shipping.

Testing includes original Commodore hardware as well as dedicated load-test equipment. Burn-in testing at loads up to 150% of normal operating conditions helps verify stable output and reliable operation before the PSU leaves our workshop.

Electroware Commodore PSU testing station

Looking for other Electroware Commodore power supplies and accessories?

Visit the Electroware eBay Store >


SAFETY INFORMATION

Risk of electrical shock and fire when opened. Indoor use only. Keep ventilation openings unobstructed. Keep away from liquids, moisture, excessive dust and heat sources. Repairs and internal servicing must be performed by qualified technicians only. Do not exceed the rated output current or power.

This replacement power supply is designed for Commodore 1541-II and 1581 floppy disk drives. Do not connect it to unrelated equipment.

A modern, correctly operating replacement PSU significantly reduces power-related risks, but it cannot guarantee correct operation of vintage hardware that may already be several decades old.

Electroware genuine Commodore 1541-II and 1581 replacement PSU

Electroware – the genuine 1541-II / 1581 FDD PSU trusted by retro enthusiasts worldwide.