Offered is one MOOG 515162 front wheel bearing and hub assembly with integral ABS wheel-speed sensor and wiring harness. The hub is identified with MOOG markings and part number 515162. An additional visible identification marking is 251015X.

MOOG 515162 is cataloged as an aftermarket replacement/interchange for multiple Mopar OEM wheel-hub part numbers, including 68185437AB, 68185437AC, 68185437AD, 68185437AE and 68296958AA. An additional aftermarket interchange reference is SKF BR930553.

This is a MOOG-branded replacement component. It is not being represented as a Mopar-branded OEM component. OEM numbers are provided as cross-reference information for identification and application verification.

The hub appears clean and unused based on the photographed wheel studs, splines, machined mounting surfaces and general physical condition. Operational history is not available, and this individual bearing/hub assembly has not been represented as operationally tested.

Technical Specifications

Specification	Value
Manufacturer / Brand	MOOG
Manufacturer Part Number	515162
Additional Identification Mark	251015X
OEM / Mopar Cross-Reference Numbers	68185437AB, 68185437AC, 68185437AD, 68185437AE, 68296958AA
Additional Aftermarket Interchange	SKF BR930553
Component Type	Front Wheel Bearing & Hub Assembly
Placement on Vehicle	Front
Side	Left or Right where MOOG 515162 is specified
Wheel Stud Quantity	8
Spline Quantity	35
Flange Mounting Hole Quantity	4
Wheel Bolt Circle Diameter	6.496 in / 165.0 mm
Flange Diameter	8.071 in / 205.0 mm
Flange Offset	2.217 in / 56.3 mm
Brake Pilot Diameter	4.839 in / 122.9 mm
Hub Pilot Diameter	4.724 in / 120.0 mm
Wheel Pilot Diameter	4.764 in / 121.0 mm
ABS Sensor	Included – integral wheel-speed sensor/harness
Primary Construction	Steel hub/bearing assembly; exact material grades not verified
Country / Region of Manufacture	Unknown

Dimensional Note: Published/catalog dimensions above are provided as identification and fitment references. They are not represented as physical measurements taken from this individual hub assembly.

Included Components

• One MOOG 515162 wheel bearing and hub assembly
• Eight installed wheel studs
• Integral ABS wheel-speed sensor
• ABS wiring harness and electrical connector

Quantity: One hub assembly. You are purchasing the exact item shown in the photographs.

Compatibility & Application

• Equipment Type: Heavy-Duty Pickup Truck
• Ram 2500: 2014–2018 – Front
• Ram 3500: 2014–2018 — Front
• 2013 Ram 3500: Certain pickup configurations only; verify MOOG 515162 by VIN/application catalog. 2013 cab-and-chassis applications may require a different hub.
• Drive Configuration: Catalog applications include 2WD and 4WD configurations.
• Position: Front – driver or passenger side where MOOG 515162 is specified.
• Wheel Configuration: 8-stud hub with 6.496 in / 165.0 mm bolt circle.
• Axle Interface: 35-spline.
• MOOG Part Number: 515162
• Mopar OEM Cross-References: 68185437AB, 68185437AC, 68185437AD, 68185437AE, 68296958AA
• Additional Aftermarket Interchange: SKF BR930553

OEM / Mopar Cross-Reference: MOOG 515162 is cataloged as a replacement/interchange for Mopar OEM part numbers 68185437AB, 68185437AC, 68185437AD, and 68296958AA. The OEM numbers are supplied as cross-reference information and do not indicate that the offered component was manufactured or branded by Mopar.

Fitment Advisory: Vehicle year, make and model alone should not be used as the sole fitment determination. Superseded OEM numbers and vehicle configurations can vary. The buyer is responsible for confirming MOOG part number 515162, the applicable OEM cross-reference, 35-spline axle interface, 8-stud configuration, ABS connector, mounting pattern and published dimensions against the vehicle being serviced. VIN-based catalog verification is recommended before purchase.

Condition

Condition Note: The hub assembly appears clean and unused based on the visible condition of the studs, splines, machined surfaces and assembly. The original MOOG package is not included because it had some damage from storage and handling. Operational history is not available and the assembly has not been represented as operationally tested. Review all photographs for the exact physical condition, markings, connector configuration and included components. You are purchasing the exact item shown in the photos.

Critical Warnings

• This is a safety-related wheel-end component. Installation should follow the applicable vehicle manufacturer's service procedures and torque specifications.
• Do not use listing photographs or estimated dimensions to determine fastener torque specifications.
• Do not strike or apply installation force through the ABS sensor, wiring harness or electrical connector.
• Protect the wheel studs, splines, machined mounting surfaces and ABS components during handling and installation.
• The buyer is responsible for confirming the correct application and fitment before installation.

California Proposition 65 Warning

⚠️ WARNING: This automotive wheel hub/bearing assembly may expose you to chemicals including lead and other metals or compounds associated with automotive components, which are known to the State of California to cause cancer and/or reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov.