100% new and high quality
1. Place the protractor on the turntable plate with the hole in the spindle.
2. Move the cartridge/tonearm until the stylus is exactly in the center of the . . Check that the cartridge is square to the outer set of grid lines. - If not, loosen the cartridge mounting screws and gently twist the cartridge until it forms a square shape.
3. Move the cartridge/tonearm until the stylus is exactly centered on the inner , pivoting the protractor as necessary. Check that the cartridge is square to the inner set of grid lines. - If not, change the overhang (move the cartridge in or out along the ) until the cartridge is square.
4. Repeat steps 2 and 3 until the cartridge is square at both points. Tighten the installation and recheck as Remove the protractor. Relax and enjoy!

High-contrast cartridge alignment protractor improves visibility and eliminates tracking errors.
Avoid overshoot distortion to maintain high-quality sound
Link to the turntable setup guide with instructions printed directly on the protractor.
Material: Plastic
color: White

Package Contents:
1 x stylus alignment protractor