This reinforced oil filter housing valve is designed for repairing the oil filter housing used on selected BMW gasoline engines. The valve helps keep engine oil inside the oil filter housing after the engine is turned off and helps prevent the oil from draining back too quickly into the oil pan.
When the original valve becomes worn, damaged, stuck, or no longer seals correctly, oil may drain out of the filter housing while the vehicle is parked. On the next start-up, the engine may need extra time to refill the oil filter housing and build proper oil pressure.
This condition may cause a short ticking noise, metallic rattle, or a delayed oil pressure warning light after start-up. Replacing only the valve can restore the oil retention function of the oil filter housing without buying the complete housing assembly, as long as the housing itself is not cracked, deformed, or badly worn.
The valve is made from aluminum alloy and steel. The reinforced construction is designed for long-term operation in contact with hot engine oil. It installs in place of the worn factory valve.
After proper installation, the valve helps hold oil inside the filter housing while the vehicle is parked and helps reduce the time needed to refill the oil filter housing after engine start-up.
Fitment depends on the installed engine and the version of the oil filter housing. The same BMW model may use different oil filter housings depending on production year, market, and vehicle configuration.
These symptoms may also be caused by other lubrication system problems. Before repair, it is recommended to check actual oil pressure and inspect the related engine components.
The valve helps prevent oil from draining out of the oil filter housing after the engine is turned off. When the valve is working correctly, oil remains inside the housing, so the engine can build oil pressure faster on the next start.
This repair part is useful when the factory valve has failed but the oil filter housing itself is still serviceable.
Replacing this valve will not fix low oil pressure caused by a worn oil pump, clogged oil pickup, damaged engine components, excessive internal engine wear, or incorrect engine oil.
Special tools and proper understanding of the engine lubrication system are required for installation. If you do not have the required experience, professional installation is strongly recommended.
Before ordering, compare the oil filter housing number on your vehicle with the part numbers listed in this description. Choosing this valve only by vehicle model or engine code does not guarantee compatibility, because different oil filter housing versions may be used within the same BMW model range.
If the housing number does not match, please verify compatibility by VIN, photos of the old valve, and the part number on the oil filter housing before purchasing.
How do I check compatibility?
Compare the oil filter housing number on your vehicle with these numbers: 11428683206, 11428642289, 11427548032, 11427597635, and 11428611284. Also check the engine type and the design of the original valve.
What are the signs of a failed oil filter housing valve?
Common signs may include a short ticking noise or metallic rattle after start-up, delayed oil pressure light shut-off, and oil draining out of the filter housing while the vehicle is parked.
Can I replace only the valve instead of the complete housing?
Yes, if the oil filter housing is not cracked, deformed, or badly worn in the valve seating area. In that case, replacing only the valve can restore the function of the original housing.
Will this valve fix low oil pressure?
Only if the problem is caused by the failed valve itself. If low oil pressure is caused by a worn oil pump, clogged oil pickup, damaged bearings, incorrect oil, or other engine problems, replacing this valve will not fix the issue.
Why should I not choose only by BMW model?
The same BMW model may come with different engines and oil filter housing versions. The main compatibility check is the part number and design of the installed oil filter housing.
What should I do if my housing number does not match?
Do not order by guesswork. Check compatibility by VIN, photos of the old valve, and the oil filter housing part number before purchasing.
Do I need to replace the seals during installation?
Replace the seals if they are hardened, damaged, no longer elastic, or were disturbed during disassembly.
11428683206, 11428642289, 11427548032, 11427597635, 11428611284
Please verify the part number on your vehicle before ordering.
All parcels are sent by airmail on the same day or the next business day, except holidays and weekends. The parcel is sent by an economical carrier because the delivery is free for you.
Please note that economical delivery is not always fast. Delivery may take from 7 to 30 days depending on the destination country, customs processing, and postal service workload. Unfortunately, we cannot affect the speed of delivery after the parcel has been shipped.
Thank you for your understanding.