ITEM SPECIFICS

Brand: Driveworks

Manufacturer Part Number: DW-K500063

Part Type: Suspension Ball Joint

Placement on Vehicle: Front Lower Left or Right

Quantity: 1

Fitment Type: Direct Replacement

Type: Press-In Ball Joint

Adjustable: No

Adjustment Range: 42 degrees

Ball Joint Assembly: Yes

Material: Housing: 45# Steel / Ball Pin: 40Cr

Maximum Outside Diameter: 51 mm

Mounting Type: Press-In

Mounting Bolt Head Diameter: 24 mm

Mounting Bolt Length: 73 mm

Mounting Bolt Shank Diameter: 24 mm

Mounting Bolt Thread Pitch: 1.75 mm

Mounting Bolts Included: Yes

Stud Type: No Threaded

Tapered Stud: No

Suspension Grade Type: Standard

Height: 71.7 mm

Dust Boot Included: Yes

Dust Boot Material: Chloroprene Rubber

Greaseable: Yes

Grease Fitting Included: Yes

Mounting Hardware Included: Yes

Nuts Included: Yes

Washers Included: Yes

Castle Nut Included: No

Cotter Pin Hole: No

Cotter Pin Included: No

Mount Plate Included: No

FITMENT

Years Make Model Position

2007-2012 Dodge Caliber Front Lower Left or Right

2007-2017 Jeep Compass Front Lower Left or Right

2007-2017 Jeep Patriot Front Lower Left or Right

2002-2007 Mitsubishi Lancer Front Lower Left or Right

2016-2020 Mitsubishi Outlander Front Lower Left or Right

2018-2022 Mitsubishi Outlander PHEV Front Lower Left or Right

INTERCHANGE

Chrysler/Jeep/Mitsubishi: 5105040AA, 5105040AB

Moog: K500063

QuickSteer: K500063

Driveworks: DW-K500063

ACDelco: 46D2363A

Centric: 610.63034

Dorman: BJ96145

MAS Industries: B50014

NAPA: 104236

Raybestos: 505-1363B

TRW: JBJ894

FEATURES

Meets or exceeds original-equipment performance specifications.

Performance tested to help ensure durability.

Forged housing provides exceptional strength and durability.

Oxidation film on the surface of the metal helps protect against corrosion.

Phosphated ball stud provides a smooth, durable, and wear-resistant surface.

Premium chloroprene rubber boot helps protect the joint from dirt and moisture.

Greaseable joint design allows service lubrication for long service life.

Press-in mounting design provides a secure fit in the lower control arm.

Mounting hardware is included for installation where applicable.

Replacement helps restore steering response, alignment, and suspension control.

Helps reduce looseness, clunking, vibration, and uneven tire wear when replacing worn parts.

NOTES

This listing is for one front lower suspension ball joint. This part fits the front lower left or right position depending on vehicle application. Two are required to replace both front lower ball joints.

Replacement joint must be pressed into the lower control arm. Some applications may require the ball joint to be pressed in from above the control arm. Verify the original part number, lower control arm design, press-fit diameter, trim, drivetrain, production date, and vehicle application before purchase.

A professional wheel alignment is recommended after installation.

Driveworks lists DW-K500063 as a ball joint, and matching K500063 interchange listings identify it as a front lower ball joint for select Dodge Caliber, Jeep Compass, Jeep Patriot, Mitsubishi Lancer, Mitsubishi Outlander, and Mitsubishi Outlander PHEV applications.