SRA Solder is a division of SRA Shops formerly Stan Rubinstein Assoc., Inc. has been in business since 1962.
We are committed to providing each customer with the highest standard of customer service.
 Part No | SMDKIT-LFFast Chip Kit for Quik SMD Removal - Lead FreeSHORT DESCRIPTIONThe Fast Chip Removal Kit is a lead free, quick, and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
FULL US SUPPORT
We offer full US support on all the products we sell.. Please feel free Contact us by phone or email if you have any queries regarding our products
HOURS OF OPERATIONMonday through Friday from 08:30AM - 5:00PM (EST)
Product Features
DescriptionThe heart of the kit is a length of Fast Chip low temperature Removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (100°C and 212°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component.
Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.
Visit UsSRA Solder Dept |