Operating Instructions

Setting the Clock

1. Press and hold the TIME SET button. The hour digits will begin to flash.
2. Use the TUNE +/- buttons to adjust the hour. Pay attention to the AM/PM indicator.
3. Press the TIME SET button again. The minute digits will flash.
4. Use the TUNE +/- buttons to adjust the minutes.
5. Press the TIME SET button one more time to confirm and exit time setting mode.

Setting the Alarm

1. Press and hold the ALARM SET button. The alarm hour digits will flash.
2. Use the TUNE +/- buttons to adjust the alarm hour.
3. Press the ALARM SET button again. The alarm minute digits will flash.
4. Use the TUNE +/- buttons to adjust the alarm minutes.
5. Press the ALARM SET button again to select the alarm source (Buzzer or FM Radio).
6. Press the ALARM SET button one more time to confirm and exit alarm setting mode.
7. To activate/deactivate the alarm, briefly press the ALARM SET button. An alarm icon will appear/disappear on the display.

Snooze Function

When the alarm sounds, press the SNOOZE button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.

FM Radio Operation

1. Press the MODE button repeatedly until 'FM' appears on the display.
2. Manual Tuning: Briefly press the TUNE +/- buttons to adjust the frequency step by step.
3. Auto Scan: Press and hold the TUNE +/- buttons to automatically scan for the next available station.
4. Volume Control: Use the VOLUME +/- buttons to adjust the listening volume.

Bluetooth Pairing

1. Press the MODE button repeatedly until 'BT' (Bluetooth) appears on the display. The Bluetooth indicator will flash, indicating it is in pairing mode.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.) and search for available devices.
3. Select "onn. Clock Radio" from the list of found devices.
4. Once paired, the Bluetooth indicator on the clock radio will stop flashing and remain solid. You can now stream audio from your device to the clock radio.
5. Use the PLAY/PAUSE button to control playback, and TUNE +/- buttons for track navigation (if supported by your device).

Wireless Charging (Qi-enabled devices)

1. Place your Qi-enabled smartphone or other compatible device directly onto the wireless charging pad located on top of the clock radio.
2. Ensure the device is centered on the charging pad for optimal charging.
3. A charging indicator (if available on your device) will confirm that charging has begun.

USB Charging

Connect your device's USB charging cable to the USB OUT port (5V/1A) on the back of the clock radio (refer to Figure 3). This port provides power to charge your device.

AUX-in Connection

To play audio from an external device (e.g., MP3 player, older smartphone) that does not support Bluetooth:

1. Connect one end of a 3.5mm audio cable (not included) to the AUX-in jack on the back of the clock radio (refer to Figure 3).
2. Connect the other end of the cable to the headphone jack or audio output of your external device.
3. Press the MODE button repeatedly until 'AUX' appears on the display.
4. Control playback and volume from your external device.

Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive sprays.
• Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.
• Avoid Extreme Conditions: Do not expose the unit to extreme temperatures, humidity, or direct sunlight.