Stainless Steel Grainfather Whirlpool and Aeration Brewing Paddle Home Brew
Grainfather Whirlpool and Aeration Brewing Paddle

Domestic and International Shipping Available

Dispatch Within 1 Business Day

Leading Homebrew Suppliers

Domestic and International Shipping Available

Sentinel

Stainless Steel Grainfather Whirlpool and Aeration Brewing Paddle Home Brew

$37.95"> $$37.95
In Stock
Dispatch Within 1 Business Day
Combined Shipping Available

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process.
The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort.

What does "whirlpooling" your beer mean and how do you do it?
Whirlpooling is a common method used in commercial breweries to separate hop pellets and trub from wort after the wort boil. Essentially the wort is pumped into the whirlpool vessel at rapid velocity, usually about 15 feet per second, to cause the wort to start spinning like a whirlpool. Sometimes the kettle doubles as the whirlpool vessel and the wort is recirculated to the kettle.
In commercial breweries this pumping process lasts for 10 to 20 minutes. Then the wort is allowed to stand for an additional 20 minutes or so to allow the hops and trub to form a compact trub/hop pile in the center of the vessel. The wort is easily separated from the pile by pumping it out of an outlet located on the side of the vessel. Although whirlpooling was originally developed to separate pelletized hops from wort, breweries that use whole hops, such as Anheuser-Busch, use whirlpools to remove trub after their whole hops have been strained from the wort.
Homebrewers can use whirlpools just like the big guys. Instead of pumping the wort after boiling, use a big spoon to stir persistently in a circular motion in one direction. This will generate a mini-whirlpool. Stir the wort at a good clip for one to two minutes and allow it to rest for 10 to 20 minutes before draining the wort into your wort cooler. Watch as the wort level gets low. If you really want to separate as much hops and trub as possible, stop the flow when the trub pile starts to suck into your wort chiller.
The whirlpool is a simple device, but there are many variations on its basic design used in commercial breweries. The most common design is a flat-bottomed vessel with a slight pitch toward the drain. This gives a great trub pile but also allows the trub to slide toward the outlet if the pile is loose. Some designs have a low point in the center and an outlet drain that is a little higher than the low point. This prevents trub from leaving with the wort. Your keg/kettle will behave like this system.
Whirlpool trivia: Some tea drinkers who use loose tea and no tea ball separate the tea leaves by stirring their tea after the leaves sink to the bottom of the cup to cause the leaves to migrate to the center of the cup. Albert Einstein thought this phenomenon was pretty nifty. He developed a general explanation, called the Teacup Effect, of why pressure changes cause solids to migrate to the center instead of to the perimeter, where it seems like they should migrate. Molson Breweries in Canada is credited with first using the whirlpool in commercial brewing.


Package Contents

1 x Brand New Stainless Steel Grainfather Whirlpool and Aeration Brewing Paddle

We endeavor to dispatch orders same day or next business day, however should your item be out of stock or there is a complication with your order there may be delays. We will notify you via message if we determine your order can not be shipped out within 3 business days.

The order will be shipped via Australia post or alternative couriers based on the weight, size of your order and your postcode.

Standard Shipping

Most shipped packages will be delivered within 1-10 business days from the date they are shipped if you are in Australia.

Expected Standard Delivery Dates:

Australian major cities & surrounding areas: 1-7 business days
Australian remote areas: 5-14 business days

Express Shipping

It will be sent via fastest possible way via Australia post or selected couriers. Some orders may even be delivered next business day.

International Shipping

The international shipping cost and delivery time may vary depending on the order’s size weight the destination country.

Estimated delivery dates: include our handling time, destination postcode and time of acceptance and also depend on postage service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.

30 Days Hassle Free Return

If the item does not work properly due to the manufacture defect or the item doesn't match the description, you should contact us via Email within 30 days of your receiving the item. We will reply with our details of how to return your item. And the item must be returned within 14 days following this notification.

You can return the item if

  • The item has a manufacturer defect and in a not usable condition for its purpose
  • The item does not match the description
  • The item is damaged during the transit when you receive it
  • The item is purchased in error or change of your mind. (Surcharge may apply)

Warranty doesn't cover misuse, after use damage, crashes, and improper installation.
We do not cover the cost of freight of return if there is no fault with the product.

Return Requirement

  1. The item must be returned in original condition with all accessories and packaging;
  2. DO NOT stick or write anything on the item itself or its packaging.
  3. The item is securely packed to ensure it is received back by us with no further damage.
  4. If you purchase the item wrongly or change your mind, the item must be returned in the original and resalable condition.

Handling Time & Handling Fee

It may take us up to 5 business days to process the returned item after it has been received.

If there is a faulty with the product or description, there will be no further handling fee charged for the buyer. The total paid amount will be refunded to the buyer or a replacement/exchange will be sent to the buyer and we will make sure the buyer bear no money loss.

If the buyer purchase the item wrongly or change his/her mind after he/she receive the item or there is no faulty found when we receive the return. The postage and handling fee will apply. All other amount will be refunded or equivalent exchange/store credit will be issued.

Postage and Handling Fee: A reasonable amount will be work out to cover the cost of shipping the order to you and the handling fee.
If the item has sustained damage in transit, or does not return as noted above, a revised refund amount may be required.

IMPORTANT

When returning the items, please make sure to include your Order Number and a note with the reason of return.

Please note, you must contact us before you make the return/exchange, and returned item by COD will be rejected. If an exchange is not available, credit will be granted or product of similar or equal value will replace the original items under your agreement.

Customer Feedback

Copyright © 2021 SZZ Home Brew. All rights reserved.