TIPS: This is a DIY Model,
if you have any DIY Idea as of mixed colors such as two red two blue, or each 4 chip one color etc,
contact us, we can customize for you.
10W 6V 12V 10W LED High Power 4 Chips Bead Chip Car Light White Red Green Blue Yellow Beads with 20MM Cooper PCB
Red/Yellow(Amber) 12V voltage infact is 9-10V
Red/Yellow(Amber) 6V voltage infact is 4.5-5V
Red/Yellow(Amber) 3V voltage infact is 2.2-3.2V
Red/Yellow(Amber) 6V voltage infact is 4.5-5V
Red/Yellow(Amber) 3V voltage infact is 2.2-3.2V
Current: 350mA-3A(3-3.6V),350mA-2A(6V),350mA-1A(12V)
Technical Parameters:
LED Type:4 IN 1 LED Chips
Voltage :3V/6V/12V(Optional)
Beam Angle: 115 degrees
Lens color: water clear
PCB board: Diameter 20mm Copper PCB base
Certificate: CE&ROSH
LifeSpan Time : > 50,000 hours
Attention to the heat,working temperature maintained at 50 degrees Celsius or lower as possible.
TIPS: Proper driver & heatsink is required. (12V version you can use 12V power to get it work directly)
3V is actually 3-3.6V
4-Chip Array:
3V: 4 in Parallel
6V: 2 in Series 2 in Parallel
12V: 4 in Series
Technical Parameters:
LED Type:4 IN 1 LED Chips
Voltage :3V/6V/12V(Optional)
Beam Angle: 115 degrees
Lens color: water clear
PCB board: Diameter 20mm Copper PCB base
Certificate: CE&ROSH
LifeSpan Time : > 50,000 hours
Attention to the heat,working temperature maintained at 50 degrees Celsius or lower as possible.
TIPS: Proper driver & heatsink is required. (12V version you can use 12V power to get it work directly)
3V is actually 3-3.6V
4-Chip Array:
3V: 4 in Parallel
6V: 2 in Series 2 in Parallel
12V: 4 in Series
On Jan 7, 2026 at 20:02:25 PST, seller added the following information: