Hi - thanks for looking at our listing for a Buffalo BS-MP2012 12-Port 10GbE/5GbE/2.5GbE Multi Gigabit Ethernet Switch. This switch is in excellent working condition and was used in a home environment, but is no longer needed due to a redesign of our home network. This switch also includes the original rails for mounting in a 19" rack.
Because this was used in a home, it also includes a pair of *Quiet* Replacement Fans for BS-MP2012 Buffalo Gigabit 12-Port Business Switch by Sunon, which is the original brand used. These fans were an additional $50+ and are included with purchase.
This switch is fast and has a ton of capacity. If you're looking to move up to 10GbE, this is the way to do it. It fully supports multi-gigabit as well and can also run at 5GbE, 2.5GbE, 1GbE, 100Mb on all 12 ports.
---
Multi Gigabit Business Switch
Buffalo’s BS-MP20 is an entry-level Multi Gigabit Business Switch supporting network scalability for 1 / 2.5 / 5 / 10Gbps.
This device is ideal for gamer PCs, desktop PCs, servers, NAS storage and AC Wave 2 Wireless Access Points.
Until now, 10GbE was an expensive technology and only for enterprise, but not anymore.
BS-MP20 Highlights

- 10 times faster speed with 10GbE (Theoretical Values)
- 2.5Gbps / 5Gbps speed without the need to upgrade to CAT6 cabling
- Traffic management features available with VLAN/QoS
- Lifetime warranty with 24/7 North American-based technical support
- Works with Buffalo remote monitoring software (Network QuickView by Buffalo) and also compatible to 3rd party software (Monitor Resources)
Flexibility for Present & Future Needs with Scalability up to 10GbE
| Speed | Cable |
|---|
| 10Gbps | Category 6A (Cat 6A) or higher |
1Gbps 2.5 Gbps 5Gbps | Category 5e (Cat 5e) or higher |
With growth in data & file sizes, and lower-cost 10GbE products; Prosumers/SMBs can now benefit from 10GbE networking.
With 10GbE compatible devices and category 6A (Cat 6a) or higher rated cables, you can improve your office productivity by eliminating network bottlenecks and shorten data backup time dramatically.
By Supporting IEEE 802.3bz standard, BS-MP20 also offers up to 5Gbps data transfer speed even with existing cable environment. (more about IEEE 802.3bz)
(See 5GbE/10GbE Compatible Network Attached Storage)
More Than Unmanaged
| | BS-MP20 | BS-GU20 | BS-GS20 |
|---|
| 10Gbps | 1Gbps | 1Gbps |
|---|
| Loop Detection | Yes | Yes | Yes |
| Jumbo Frame | Yes | Yes | Yes |
| VLAN | Yes | - | Yes |
| QoS | Yes | - | Yes |
| Web Configuration | Yes | - | Yes |
| SNMP | - | - | Yes |
| IP Routing | - | - | Yes |
The BS-MP20 offers the following major business features to meet your demand at an affordable price point.
(See Buffalo business switch lineup)
---Detailed Product Description of Quiet Fans:- Condition: Used, Bulk
- Model: Buffalo BS-MP2008-FANKIT-2
- 2x replacement fans for Buffalo BS-MP2008, BS-MP2012
- by Delta or Sunon.
- Quiet fans, not the same width/spec as stock fan.
- 12~18dBA low noise
- Best for home networking.
- ►Guarantee works fine with NO fan failure red led light, NO faults alarm.
Specifications:
- MagLev or Ball Bearing System
- 60,000hrs Life Expectancy
- UL/CUR/TUV/CE Approvals
- RoHS Compliant
- 3 wire lead
- 3pin connector tailed ready to install.
Compatible with:
- Buffalo BS-MP2008, BS-MP2012
Specifications comparison:
► Please check here for Original Hi-speed fan = eBay item number: 274626090309
| Our Quiet Fan | original stock fan |
Manufacture / Brand | Delta/Sunon | Delta
|
Fan Speed | 4700~5500 R.P.M. (Revolutions per minute) | 9000 R.P.M. (Revolutions per minute) |
Noise Level | 13~18 dB-A (6cfm)
| 32.5 dB-A (10cfm)
|
Bearing Type | MagLev or Ball Bearing
| Ball |
Termination | wire lead | wire lead |
Power Connector | Pin connector tailed (Plug-and-Play) |
|
Function/Features | Quiet fans | Loud and Noisy |
RoHS Status | RoHS Compliant | Non-Applicable |
Life Expectancy | 60,000 hrs (running 24/7 for 7-years) | N/A |