48mm WP 4860MA closed cartridge forks removed from a 2010 FX450. These forks are in good condition with normal signs of use. These forks were revalved by SMS Racing for a 225 pound rider weight. There are a few scuffs on the upper tubes from normal use in the woods. All of the lower guard attach bolt holes are in good condition, as are the forks in general. The plastic guards have been slit down the center of the aft side for easy on/off. Upper clamping surface is 54mm, lower clamping surface is 60mm. These forks use a 26mm front axle. There was no evidence of leakage on these forkswhen I di-assembled the bike, but having sat in my shop for a few months there is evidence of seepage, so the seals will either need to be cleaned or replaced. I did not disassemble these forks. My evaluation is based on a test ride on the bike and a visual inspection only.