JL Audio's RD1500/1 mono amplifier will power your subwoofer with up to 1,500 watts RMS, so you'll really hear and feel the bass over the whistle of the wind and rumble of the road. An optional wired remote lets you adjust the sub's volume from your front seat.
Low current demand, low distortion, and integrates well
The RD1500/1 plays your music with true fidelity and impressive impact, without straining your car's electrical system too much, thanks to JL Audio's proprietary NexD™ amplifier technology. "Differential-balanced" inputs keep the incoming signals clear of outside noise, and allow you to connect this amp to just about any radio. The speaker-level inputs feature two auto turn-on modes so you can readily incorporate this amp into a factory system — no need for RCA connections or a remote turn-on lead for this setup.
LED clip light and other cool features
A low-pass filter and bass boost help you dial in the perfect tone for your sub and enclosure. An onboard LED clip indicator lets you set the amp gain quickly and accurately with the use of a sine wave test tone. A removable cover hides the amp's controls, resulting in a handsome appearance and a tamper-resistant installation. Cool blue LED accent lighting adds some charm to this amp's rugged good looks.
Product highlights:
- mono subwoofer amplifier
- 750 watts RMS x 1 at 4 ohms
- 1500 watts RMS x 1 at 2 ohms
- 1500 watts RMS x 1 at 1 ohm
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs help eliminate noise
- variable low-pass filter (50-500 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- LED clip light helps set gain
Other Features:
- blue LED accent lighting
- optional wired remote level control ( not included - sold separately )
- preamp inputs and outputs
- speaker-level inputs (speaker wire to RCA Adapter required - Sold Separately )
- wiring, fuse, and hardware not included with amplifier
- 2-gauge power and ground leads and a 150-amp fuse recommended
- 18-1/16"W x 2-3/16"H x 7"D
Serial Numbers Are Recorded and Photographed Per Each Customer Order. Any product returned for any reason Must be returned in its original and serial number matching box / packaging.Return for Refund
- All returns must be new, unused and/ or unopened in original serial number matching packaging including screws, hardware, knobs, plastic coverings, protective films, serial numbers, tags, stickers, and other manufacturer labels not removed or tampered with etc. A 20% restocking fee may be deducted from return refunds. Returned merchandise that is either opened, used or missing items will be issued up to a 50% partial refund.
- The retail box cannot be used as a shipping box.
- Serial numbers must match serial numbers shipped along with matching serial number packaging, merchandise is photographed with serial number per purchase and recorded for our records, items returned back to us that were not purchased from us will not be refunded or warrantied.
- A traceable and insured shipping method is strongly recommended, we are not responsible for merchandise that has not reached our facility.
- If you do not see something you expect to be included in the description we provide, it will not be included.
- Speakers, Tweeters, and Subwoofers with burnt/ frozen coils are not warrantied
- Amplifiers that are returned and deemed defective from improper installation or use are not warrantied
- Shipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.