








Have you met some troubles like below when using an smoke machine automotive?
- "Smoke turns to liquid almost instantly inside whatever you are testing"
- "The smoke is very thin, impossible to see and find leaks"
- "Fluid leak cause catastrophic engine damage"
After five generations of technological innovation, SM601 Smoke Leak Detector was born. Avoiding all the disadvantage of past technologies, SM601 has these advantages:
Easy to Use: With easy-use function and portable design, the hook allows you to hang it on your hood latch, and conical adapter will fit most intakes.
Powerful and Durable: The third-generation technology uses heating wire and wick cotton, needs to be replaced frequently and the smoke has a peculiar smell. The fourth-generation technology uses ceramics heating, it's very fragile during transportation and use. SM601 auto smoke machine avoids these shortcomings, as a durable smoke detector, it also saves you a lot of money.
Output Smoke in Seconds: Output lots of smoke within 30s to detect the leaks in pipe system, reducing diagnostic time dramatically.
Safe for All Vehicles: Protect vehicles from high pressure damage, also avoid fluid leak cause engine damage.
|
|
|
|
|---|---|---|---|
Step1Mount the hook and shop air adapter to the SM601 smoke leak detector, plug the power cord into the socket. | Step 2Fill (mineral Oil based) smoke oil into the SM601 auto smoke machine, from refill port on the top. Note: The oil level shall not exceed the level gauge. | Step 3Connect shop air supply, connect 12V vehicle power, introduce shop air to the SM601 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then SM601 smoke machine automotive will start to generate smoke. | Step 4In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. |

Romondes SM601 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help you to locate hard-to-find leaks in any sealed system, such as Cooling System Test, Car Sealing Test, Throttle Shafs, Engine Block Test, Intake System Test, Exhaust Systems Test, Crankcase system test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test, etc.

With the superb design, the SM601 leak detector can out put smoke within seconds and discover leakage holes as small as 0.2mm. Adopts the principle of isolated heat conduction, the smoke created from the machine is non-toxic. To ensure the safety of people and vehicles, the engine does not need to be ignited during use. Unlike the traditional method of using soapy water, only the upper half of the complex pipeline can be tested, cars are tested for all-round pipeline leakage.
|
|
|
|---|---|---|
Overheat & Anti-frost ProtectionSM601 EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 75°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation. Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.And don't use SM601 more than 20 minutes.Excessive heat will cause the tube to melt. | What's in the Package?Packing List:
| "0" Risk PurchaseTo ensure your high-quality shopping experience, Romondes provide12-month w-arranty. If you have any questions, feel free to contact Romondes team via Ebay message. |

Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with automotive diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
*Note: Like most EVAP smoke machines in the market, SM601 smoke leak detector need to connect air supply, if you want an car smoke machine with its own air supply, we would recommend ANCEL S2000 which has its own air compressor.
A1:The smoke machine is operated according to normal operating procedures, the smoke will not come out from the inside of the housing.First open the gas switch and then power (power on the heating, the gas does not flow, the heat will not carry away). Use gas first to determine whether there is a leak, there is no leakage, there is no need to smoke. Even if there is a leak, before injecting smoke should also open the distal interface of the pipeline being tested until there is smoke and then plugged, so that the smoke quickly filled with the system being tested, so that the entire test process only takes 1-2 minutes to complete.
A2:Does the SM601 smoke tester's tube between the flow meter and the heater is made of Teflon PTFE, with a temperature resistance of 270 degrees.
The SM601 automotive smoke machine has overheat protection, but the temperature protection is triggered at the bottom line of the heater wire, in order to prevent external fire from overheating. The tube will not melt under normal ventilation unless the air supply is turned off or the system is being tested. So the test needs to pay attention to the state of the flow meter, do not keep running the machine more than 8 minutues , which will cause the temperature to keep rising, the gas will not flow will not take away the heat.
Q3: Does the SM601 included the oil to run the mahcine?
A3: The SM601 just has littel oil that can support to use 1.2times, and then you can buy the mineral oil or baby oil to use it
We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect.
Payment should be made within 7 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Please include your special requests in eBay note if there is any.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.
2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
3:Please leave us Positive Feedback
and 5-stars★★★★★after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.
