LT4 Intercooler Pump Upgrade Stainless Steel Bracket and Clamp Kit for Pierburg, Bosch and other electric coolant pumps and devices (70-90 mm OD)

PSS Part #: A-402-2-1013

Fits in place of the OEM pump and bracket assembly on these vehicles (wiring adapter harness required when changing to a different pump):

2016-2019 Cadillac CTS-V (LT4 engine)
2014-2019 Cadillac CTS Vsport (LF3/LF4 3.6L twin turbo engines)
2017-2024 ZL1 Camaro (LT4 engine)
2012-2015 ZL1 Corvette (LSA engine)
2015-2019 Z06 Corvette (LT4 engine)

Description:

Heavy duty 2.5 mm (0.100") thick stainless steel bracket with stainless clamp designed to accept pumps (and other round objects) from 70 to 90 mm in diameter (2-3/4" to 3-1/2").
Mounting holes are sized to accept 6 mm or 1/4" fasteners (M6 stainless hardware included)
Mounting hole is slotted on one side to allow for slight variation in mounting hole locations. Accepts bolt patterns from roughly 110 mm to 130 mm (4.3" to 5.1") apart.
Bracket design allows pump to be rotated to almost any angle for proper placement (for vehicle fitment and to meet pump manufacturer orientation requirements).
Clamp can also be rotated on the bracket to provide clearance or easier access to the clamp tightening fastener.

Includes:

304 stainless steel heavy duty bracket
High quality Norma stainless worm gear band clamp
Stainless steel M6-1 mm flange head screw (2x)
Stainless steel M6-1 nylon locking flange nut (2x)

Designed to work with the following pumps (clamps over the existing rubber isolator built into these pumps):

Pierburg CWA100
Pierburg CWA150
Bosch PCE, PN 0 392 024 058
Bosch PCE, PN 0 392 024 078
Bosch PCE2-XL, 0 392 024 53G
Bosch PDE pumps

This bracket allows the above pumps to be installed in place of the following OEM GM part # pumps (adapter harness not included - available in our ebay store):

13597902
22768489
22901367
23267106
22979623

If you are using this with a pump that does not have a rubber isolation ring built in we recommend adding one to help reduce noise and vibration (NVH) issues. For very wide/long pumps you may want to use two clamps (only one clamp is needed for the above applications).

Note - pump shown in some images just for reference to show how the pump is installed. A pump is NOT included with the bracket.

Dealers and installers - contact us for quantity pricing.

Seller name: Product & Service Solutions
See our other eBay listings

SHIPPING & HANDLING

Shipping Service: Please refer to eBay shipping section. Most items offer multiple shipping options so be sure to compare shipping rates.
Shipping Cost: Please refer to eBay shipping section
Order Processing Time: Three (3) business days

NOTE: Purchases valued at over $50 will be shipped with signature required.

ADDRESS CHANGES: We will only ship to the eBay listed address. Due to the buyer/seller protection policy through EBAY, we do not have a way of changing the original address used at the time of purchase. Please do not ask us to. It is the buyer's responsibility to make sure the shipping information is correct before placing the order.

CUSTOMER SUPPORT: If you have questions about the product or your order please contact us via eBay Messages for assistance.

RETURN POLICY

Return shipping paid by: Buyer

Item must be returned within: 30 days
Refund will be given as: Money Back

We will gladly replace any defective item returned within the stated warranty period (does not apply to items sold AS IS). We will also accept returns of most new products ordered (except as noted below) as long as they have not been installed or disassembled and are returned in the original packaging in new and saleable condition. Requests for return of new parts must be submitted within 30 days of the purchase date. All new parts returned will be subject to a 20% re-stocking fee. We can not accept any returns on any part that has been installed or modified.