This BEC MX-200e VZW Advanced Industrial M2M Router is the perfect solution to insure industrial connectivity for IoT devices.

This unit is new open box, includes manual, rail Mount, power block & power adapter. They support antennas, but these are not included, they must be purchased separately.

Features:Availability and Resilience

• Dual-WAN ports (4G LTE-A & Ethernet WAN)
• Load balancing – Maximizing bandwidth of outbound traffic
• Automatic failover and fallback
• Virtual Routing Redundancy Protocol (VRRP)

Network Protocols and Features

• IPv4, IPv6, IPv4 / IPv6 dual-stack
• IP Tunnel IPv6 in IPv4 (6RD)
• IP Tunnel IPv4 in IPv6 (DS-Lite)
• NAT, static routing and RIP-1/2
• Universal Plug and Play (UPnP) compliant
• Dynamic Domain Name System (DDNS)
• Virtual server and DMZ
• SNTP, DNS relay, IGMP proxy, and IGMP snooping for video service
• MLD proxy and MLD snooping for video service
• Supports port-based Virtual LAN (VLAN)

Firewall

• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack, Ping of Death, etc.
• Access Control
• IP Filtering, MAC Filtering, URL Filtering
• Password protection for system management
• VPN Passthrough

Management

• Quick Installation Wizard
• Web-based GUI for remote and local management
• Firmware upgrade and configuration data upload and download via web-based GUI
• Supports DHCP server/client/relay
• TR-069 supports remote management
• Support SNMP
• Syslog monitoring
• Out-of-Band Management via serial console
• BECentral® Cloud-Based Remote Management

Quality of Service Control

• IEEE 802.1Q VLAN
• Outbound Load Balancing (Round Robin, Weight, or IP Hash)

Secured VPN

• IPSec VPN Tunneling (up to 8 tunnels)
• PPTP VPN Tunneling (up to 4 dial-in/dial-out tunnels)
• L2TP over IPSec VPN Tunneling (up to 4 dial-in / dial-out tunnels)
• GRE (up to 8 tunnels)
• Embedded PPTP / L2TP / IPSec Client and Server
• IKE Key Management
• MPPE Encryption for PPTP
• IPsec DES, 3DES and AES encyption
• OpenVPN: 1 server up to 4 clients

Dynamic Routing Protocols

• BGP and OSPF

Physical Interface

• 3G/4G LTE: Two(2) SMA Female Connectors
• GPS: One (1) SMA Female Connector
• WAN: 3G/4G LTE (and/or ETH WAN Optional)
• RS-232 (DCE, DB-9): one (1) port
• Ethernet LAN: 2-port 10/100/1000Mbps auto-crossover (MDI/ MDI-X) switch
• SIM Card: One (1) slot
• Reset Button
• Power Connector: 4-pin connectors
• LED Indicators: Power, Internet, LTE, Ethernet

Power Specifications

• Input: DC 9V~56V

Physical Requirements

• Dimensions: 4.29″(W) x 1.17″(H) x 3.43″(D) (109mm x 29.7 mm x 87 mm)

Operating Environment

• Operating temperature: -4 to 140º F (–20 to 60º C)
• Humidity: 20 ~ 95% non-condensing