CEL-DEC501MINI uses SigmaStar high-performance video processing chip to realize network media video stream decoding, 

support H.265/H.264 video codec algorithm, support multiple stream protocols such as HTTP/HLS/FLV/RTSP/RTMP/SRT/UDT/RTP/PTE, and ensure clearer and smoother video transmission effect. 

also, Using another firmware, it support play multiple USB files one by one with the rotating mode.

- Output one HDMI signal and one 3.5mm audio signal

- Highest decoding 4K@30 Frame screen

- Decoding video formats H.265/H.264, audio formats AAC, AC3, MP3, MP2, etc

- Supports decoding with the highest possible 4K@30fps stream, or decode 4 channels of up to 1080P@30fps stream at the same time

- Single screen, multi screen display or layout setting

- Decoding multiple streaming protocols HTTP/HLS/FLV/RTSP/RTMP/RTMPS/SRT/UDT/RTP/PTE

- Decode all IP cameras of ONVIF protocol, such as Dahua, Haikang, Xiongmai, etc.

- Using another firmware, One USB interface, supporting polling and playback of video files (ts, ps, mp4, mov, mkv, flv formats) on the USB drive.

- The decoding delay of this product is small; Small size, light weight, easy to install, and easy to operate.

Pay attention to, the device can't decode the B frame.

http://username:password@192.168.1.168/0.ts

http://username:password@192.168.1.168/0.flv

http://username:password@192.168.1.168/0.m3u8

rtsp://username:password@192.168.1.168/0    (rtsp over tcp)

rtsp://username:password@192.168.1.168/0?udp    (rtsp over udp)

rtmp://username:password@192.168.1.168/live/0

rtmps://username:password@192.168.1.168/live/0

udp://username:password@238.0.0.1:1234

SRT listener mode

srt://0.0.0.0:9000?mode=listener&smoother=live&pbkeylen=16&passphrase=password

SRT caller mode

srt://192.168.1.168:9000?smoother=live&pbkeylen=16&passphrase=password

"username" is authentication username,"password" is authentication password.Do not fill in "username:password@" or “&pbkeylen=16&passphrase=password” if application don`t need authentication.