This analogue output module generates standard 4–20 mA signals. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field side. The module's output channels have a common ground potential.

•  Number of analogue outputs : 4 
•  Total number of channels (module) : 4 
•  Signal type Current Signal type (current) : 4 - 20 mADC 
•  Actuator connection : 4 x (2-wire) 
•  Resolution [bit] : 12 bits 
•  Data width : 4 x 16-bit data; 4 x 8-bit control/status (optional) 
•  Load impedance : either 0 … 300 Ω or 300 … 600 Ω (same resistance for all load impedances) 
•  Conversion time (typ.) : 10 ms 
•  Output error, reference temperature : 25 °C 
•  Output error, deviation (max.) of the upper-range value : 0.1 % 
•  Temperature error (max.) of the output range value : 0.01 %/K 
•  Recovery time (typ.) : 100 ms Supply voltage (system) 5 VDC via data contacts 
•  Current consumption : (5 V system supply) 60 mA 
•  Supply voltage (field) : 24 VDC (-25 to +30 %); via power jumper contacts (power supply via blade contact; transmission (field side     supply voltage only) via spring contact) 
•  Isolation : 500 V system/field 
•  Indicators : LED (A) green: function; LED (B) red: Error