This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated. The state of the relay is indicated by a LED.

• Current consumption (5 V system supply) : 90 mA 
• Isolation : 1500 V (system/field) 
• Indicators : LED (A, E) green: Status relay 1, relay 2
• Number of digital outputs : 2 
• Total number of channels (module) : 2 
• Signal type : Digital 
• Actuator connection : 2 x (1-wire) 
• Output circuit design : 2 changeover contacts relay 
• Output characteristic : potential-free 
• Pull-in time (max.) : 8 ms Drop-out time (max.) 4 ms 
• Switching frequency (max.) : 0.1 Hz nominal load 
• Switching voltage (max.) : 250 VAC, 300 VDC Switching current (max.) 1 A 
• Switching current (note) : 1 A at 250 VAC and 40 VDC; 0.15 A at 300 VDC 
• Switching voltage (min.) : 12 V 
• Switching current (min.) : 100 mA 
• Electrical switching operations (min.) at max. resistive load : 1 x 10⁶ switching operations 
• Mechanical switching operations (min.) at max. resistive load : 5 x 10⁶ switching operations 
• Output data width (internal) max. : 2 bits 
• Supply voltage (system) : 5 VDC via data contacts