This analogue output module generates standard 0–10 V signals.
The output signal is electrically isolated and transmitted with a resolution of 12 bits.
The outputs are short-circuit-protected.
The internal system supply powers the module.
The output channels have one common ground potential.
- Number of analogue outputs : 2
- Total number of channels (module) : 2
- Signal type : Voltage
- Signal type (voltage) : 0 - 10 VDC
- Actuator connection : 2 x (2-wire)
- Resolution [bit] : 12 bits
- Data width : 2 x 16-bit data; 2 x 8-bit control/status (optional)
- Load impedance (voltage output) : ≥ 5 kΩ
- Conversion time (typ.) : 2 ms
- Output error, reference temperature : 25 °C
- Output error, deviation (max.) of the upper-range value : 0.1 %
- Temperature error (max.) of the output range value : 0.01 %/K
- Recovery time (typ.) : 0.3 ms
- Linearity : ±10 mV
- Supply voltage (system) : 5 VDC via data contacts
- Current consumption : (5 V system supply) 65 mA
- Isolation : 500 V system/field
- Indicators : LED (A, C) green: Function AO 1, AO 2
As time permits I will be listing other similar and compatible Wago modules so please keep watching if these items could be of interest to you.