Wilwood Tandem Remote Master Cylinder - 1in Bore Black
Wilwood's Remote Tandem Master Cylinder is available in 2 bore sizes 1.00* and 1-1/8*; and two finishes: ball burnished and black e-coat. The 1* bore can be used in manual and power assisted applications and does not come with a pushrod. The 1-1/8* bore is designed for use primarily with power brake applications, either from vacuum assist or hydraulic assist systems. They*re designed for mount flanges from 3.22* to 3.40*, common measurements for most domestic cars and trucks from the mid-1960s to present, and offer fluid outlet ports on both sides of the bore. The stroke is set at 1.12* with a volume ratio of 2:1 between the primary and secondary chambers. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders. We also offer our combination proportioning valve kit, which includes brackets and stainless lines specifically for use with these master cylinders, see PN 260-14248 for a retrofit kit.
| Master Cylinder Dimensions | |
|---|---|
| Bore Size | 1.00" |
| Area (in²) | 0.780 |
| Stroke | |
| Volume (cu in) | |
| Master Cylinder Description | |
| Type | Tandem Outlet |
| Outlets | 2 |
| Material | Aluminum / Plastic |
| Finish | Black E-coat |
| Reservoir | |
| Res Type | Remote |
| Res Size (oz) | 7.0 / 7.0 |
| Res Size(cu in) | 12.6 / 12.6 |
| Rate | |
| UPC Number | |
| UPC | 889545078152 |
| Additional Dimensions | |
|---|---|
| Overall Length(in) | 7.16" |
| Flange to End Length (in) | 6.56" |
| Inlet Size (in) | .87" or 11/16-20 |
| Inlet Fit (in) | 1/4" Hose |
| Outlet Size 1 (in) | 1/2-20 |
| Outlet Fit 1 (in) | 3/8-24 IF or 1/2-20 IF |
| Outlet Size 2 (in) | 1/2-20 |
| Outlet Fit 2 (in) | 3/8-24 IF or 9/16-18 IF |
- Pictures are for display purposes only and may not be application-specific. Manufacturers often makes updates to products and/or packaging without notifying resellers. While we have made every effort to have the most up-to-date product pictures, sometimes you may receive a product or manufacturer packaging that is different than the one shown in the listing.
- All products shown are designed for USDM (United States Domestic Market) applications. We cannot confirm fitment for any vehicle outside of the United States; it is buyer's responsibility to ensure fitment on their particular application.
- We strive for 100% satisfaction and positive feedback. Please contact us prior to leaving negative or neutral feedback if we did not meet your expectations.
- Customers must adhere to Ebay return policy guidelines. No returns on opened items; items must be in new, unused and re-sellable condition. Do not write on or de-face manufacturer packaging.
- No substitutions, and orders cannot be cancelled or changed once payment is made. Please send any messages before placing order if you have any questions. If you have made a mistake in your order, it will need to be returned for refund.
