Specifications
HSP-SP1502 Servo Specifications
- Total Height (A) = 45.5mm
- Body Width (B) = 40mm
- Below Mount (C) = 27mm
- Above Mount (D) = 18.5mm
- Total Length (E) = 53.5mm
- Total Width (F) = 20mm
Note
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Servo Attributes
| Size | Standard |
| Gear Material | Metal |
| Servo Spline Count | 25Tooth |
| Waterproof Casing | Yes |
| Case Material | Metal |
| Height (A) | 45.5mm |
| Body Length (B) | 40mm |
| Bottom to Under Mount (C) | 27mm |
| Top to Under Mount (D) | 18.5mm |
| Length (E) | 53.5mm |
| Width (F) | 20mm |
| Rotational Degrees | 120° (Normal) |
| 6V Torque kg/cm | 15 |